New gauges???

[Seacruiser2]

Hi everyone,

New to the forum so please excuse me if this topic has already been discussed. I just purchased a 1999 Maxum 4600 SCB with Cummins Diesel engines. We are replacing all original gauges. I was wondering if their is specific gauges that have to be used for Diesel engines? Also what brand do you recommend? Any input is appreciated! Thanks

[Phillbo]

Most likely your gauges are original from Faria :

https://fariabeede.com/2-pages/products_marine.php

You'll want all the standard gauges but if the engines are turbo charged you may want to add a Boost Gauge.

[mmwjr]

Welcome aboard!

The only gauge that I’m not sure would standard is the tachometer. In a gas engine it gets pulses from the ignition coil but no ignition with a diesel which I’m not sure how that works.

[Phillbo]

I THINK the Tach on a diesel engine reads the Cam Positioning Sensor....

[mmwjr]

Originally Posted by Phillbo

I THINK the Tach on a diesel engine reads the Cam Positioning Sensor....

I figure there would be something like that or old school cable driven.

[Seacruiser2]

Thank you for the link. I’m in contact with a tech with Faria now figuring out what we need. I’ll post updated info in case someone else has the same questions.

[glodaze]

Seacruiser2,

Did you find what you were looking for? If so, can you provide the contact details for the person you were communicating with and the parts information.

Thanks,
John

[shrew]

Originally Posted by glodaze

Did you find what you were looking for? If so, can you provide the contact details for the person you were communicating with and the parts information.

https://fariabeede.com/2-pages/warra...%20in%20detail.

https://fariabeede.com/forms/?form=new#rep_new

[glodaze]

Thank you for the reply. I did reach out to faria beede yesterday and was able to speak with an engineer.

Also, for anyone that might be interested https://aplusmobilegraphics.com does produce dash panels. Mike Hood (the owner) is a very nice guy and will walk you through the entire process.

[glodaze]

New gauges and new dashboard - all 7 pieces.

John

2000 4600 SCB
Oxnard, CA

[mmwjr]

Originally Posted by glodaze

New gauges and new dashboard - all 7 pieces.

John

2000 4600 SCB
Oxnard, CA

Are they the Chesapeake series?

[glodaze]

Hi Mike,

Yes, they are the the Chesapeake series.

John
2000 Maxum 4600 SCB 370 Cummins 6BTA
Oxnard, CA

[mmwjr]

Originally Posted by glodaze

Hi Mike,

Yes, they are the the Chesapeake series.

John
2000 Maxum 4600 SCB 370 Cummins 6BTA
Oxnard, CA

Thanks, I’m considering them for my Silverton.

[glodaze]

Easy to install being front mount....