Go Back   Maxum Boat Owners Club - Forum > Maxum General > Maxum Owners General Discussions
Reload this Page Water temperature gauge
Click Here to Login

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-11-2022, 08:57 AM   #1
Lt. JG
 
Eric08's Avatar
 
Join Date: Apr 2022
Location: Barcelona (Spain)
Posts: 34
Default Water temperature gauge
Hi guys,

Do you know where I can find this model of water temperature gauge for a Maxum 2700?
Thanks.
Regards.
Eric

__________________

__________________
From Barcelona. 2700 SCR 1998.
Eric08 is offline   Reply With Quote
Old 08-13-2022, 12:31 PM   #2
Lt. Commander
 
Join Date: Mar 2017
Posts: 139
Default
Great Lakes skipper is a good source for Faria gauges. You may find the replacement or something very similar.

https://www.greatlakesskipper.com/bo...iner-old-style

Before you order it, check that the connector on the back is making good contact. The ones they used are notorious for coming loose. Also (I assume you did) make sure the sender on the engine is good by checking the signal wires.


Sent from my iPhone using Tapatalk
__________________
yahoo82 is offline   Reply With Quote
Old 08-13-2022, 12:46 PM   #3
Lt. JG
 
Eric08's Avatar
 
Join Date: Apr 2022
Location: Barcelona (Spain)
Posts: 34
Default
Thanks, but nothing...
__________________
From Barcelona. 2700 SCR 1998.
Eric08 is offline   Reply With Quote
Old 08-13-2022, 03:20 PM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,742
Default
Unfortunately Faria custom made these for Maxum. If you send it to them that may be able to repair it.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is online now   Reply With Quote
Old 08-16-2022, 05:42 PM   #5
Lt. JG
 
Eric08's Avatar
 
Join Date: Apr 2022
Location: Barcelona (Spain)
Posts: 34
Default
I solved my problem for only 14€. I only took off and glued the old glass on the new gauge.

__________________
From Barcelona. 2700 SCR 1998.
Eric08 is offline   Reply With Quote
Old 08-16-2022, 07:08 PM   #6
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,742
Default
How does it look installed?
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is online now   Reply With Quote
Reply

Tags
gauge

« Interior ceiling cuddy cabin lights 2002 Maxum | Center of Gravity »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Popular Tags
#engine #drainplugs #scr 4.3 4.3 issues 7.4 mpi 1750sr 1750xr 1800 1800sr 2600se 2900 axius 3300 scr 4100 sca 4600 alarm tone battery binnacle leather cowl blackwater bulkhead cabin construction photos damage deck cushions engine bay engine beep for sale fridge fuel problems fuel sender gas gauge gauge gauges hull photos ignition fuse interior lettering letters low hours with trailer low power marine engine issues maxum 2000 boat & trailer maxum 3000scr maxum 4100 sca merc cruiser 4.3 new engine ohio plane polystyrene blocks port side radio speaker fuse raised maxum letter u rpms search parts seating seat removal sr1750 stereo stringers struts tank thru hull trouble starting upholstery vacuflush visibility waste water in cylinders water leak water sprayer windshield xr1750
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 05:37 PM.

Contact Us - Maxum Owners Club - Archive - Community Rules - Terms of Service - Privacy - Accessibility - Top

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2025, vBulletin Solutions, Inc.