Speedo pickup on Bravo 2 drive
My speedometer stopped working (actually hasn't worked this season) and I suspect the inlet holes on the drives are clogged. I have seen references in the forum as to the location of the hole on Alpha drives. Can anyone tell me where the hole is on a Bravo 2 drive? Since the boat is in the water and I will be doing this strickly by feel, I would like a rough dimension from the cavitation plate (assuming this is the name of the plate that the horseshoe shapped anode is attached to on the front of the drive). All help is appreciated. :roll:
__________________
BayBoy
1999 Maxum 3200 SCR
Twin 5.7 Mercruisers/Bravo 2
|
Linear Mode
