Bow horn removal?? - Maxum Boat Owners Club

shepster · 12-29-2008, 02:23 PM

I have a 01 2300SC with the horn recessed in the bow. There are no screws on the cover. How do you remove it to repace? Does it just pop out or do I have to go in the cuddy. What type of replacement do I put in?

Thanks,
Shep

seapuppy · 12-29-2008, 02:58 PM

shep
you need to go in thru the anchor locker ...it's really hard to get into but can be done...I'd replace it with either the same thing or add a trumpet horn....those stock horns are really wimpy....I added a trumpet horn on the side of my boat near the helm...it was a bear to install but man is that thing loud....no kidding ...it gets the attention now!!....

SP

shepster · 12-30-2008, 10:49 PM

Thanks, I'll give it a shot this weekend.

gezy · 02-06-2009, 08:44 PM

this is a job i need to do on mine. how did you get it out then :?

shepster · 02-07-2009, 11:34 AM

Ancor locker is solid. Pried off the cover and removed the two screws that hold the horn in. On mine there was actually 3 screws that hold the cover on, but came off easliy. My Maxum dealer in Richmond, VA was the cheapest I found the horn. $33+ for the horn and $3+ for the cover.

Shep

gezy · 02-09-2009, 10:41 PM

ok thanks. i will have a go at that :wink: