Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-10-2015, 01:12 AM   #31
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Perry Hall, Maryland
Posts: 5,469
Default

Quote:
Originally Posted by brineair View Post
So I found that the pump is working fine. However, the reason no water was coming from the aft shower was due to the fact that all the water had leaked out.

There are two hoses coming out of the fresh water tank. One is a plastic blue tube and the other is a metallic braided looking hose that you typically find on a household faucet. Both of them are leaking at the exact same type of fitting.

Would these have been loosened for winterization purposes? Do they just need to be tightened down or do they need to be replaced. I will post a video and picture later.

Could have been removed to winterized. All you can do is see if they are loose.
__________________

__________________
Mike
mmwjr is offline   Reply With Quote
Old 06-10-2015, 01:21 AM   #32
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Perry Hall, Maryland
Posts: 5,469
Default

All you can do is see if they are loose.

Guess I am studdering, did not think the last post worked.
__________________

__________________
Mike
mmwjr is offline   Reply With Quote
Old 06-10-2015, 01:49 PM   #33
Lt. JG
 
Join Date: Feb 2015
Posts: 45
Default

I guess I could only upload the image. There are black circles (hard to see) around each leak. Any more suggestions would be greatly appreciated. Again Not sure if they are just loose or need to be replaced? Thanks again!
Attached Images
File Type: png image1.PNG (1.16 MB, 16 views)
brineair is offline   Reply With Quote
Old 06-10-2015, 02:48 PM   #34
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 742
Default

Well, first of all, that is the water heater, not the fresh water tank.



Those appear to be compression fittings, so they have to be tight to not leak. It is possible someone opened them to drain the water heater, but, you would typically drain it using the drain valve on the tank itself. That drain valve is right behind the blue pipe in your picture, below the hot water outlet from the tank.
Kevlar7r is offline   Reply With Quote
Old 06-10-2015, 02:49 PM   #35
Lt. Commander
 
0Gravity's Avatar
 
Join Date: Sep 2014
Posts: 167
Default

If they are not loose you will probably need to replace the fittings and re - plumb some of the piping! If you do look into Sharkbite fittings at Home depot, they will work with your existing piping.
0Gravity is offline   Reply With Quote
Old 06-10-2015, 03:39 PM   #36
Lt. Commander
 
Join Date: Jan 2014
Posts: 170
Default

I believe they are PEX water lines so make sure you get the proper fittings. You don't want to use metal ferrules. I'm not sure if they make shark bite for pex but it's possible. I would just get compression pex. Box stores should have it.
BB
Baby Blue is offline   Reply With Quote
Old 06-10-2015, 03:45 PM   #37
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 742
Default

Sharkbite and Pex are like peas and carrots! I replumbed my entire guest house with it. Best thing ever. Pex works with both compression and sharkbite fittings. Sharkbite are more expensive, but much easier.
Kevlar7r is offline   Reply With Quote
Old 06-10-2015, 04:00 PM   #38
Lt. Commander
 
Join Date: Jan 2014
Posts: 170
Default

interesting and good to know. I use the shark bites to cap off sink supplies when doing kitchen renovations. I mostly deal with copper but good to know I can use that on pex if it comes up. shark bites are a great invention! nothing worse than trying to solder a cap or valve when it's difficult to get all the water out of the line. never had much luck with the bread trick..
anyway.... thanks for the info. learn something new every day they say.
BB
Baby Blue is offline   Reply With Quote
Old 06-10-2015, 04:12 PM   #39
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 742
Default

The bread trick has worked for me in the past.



You can see in his picture that the pex is red and blue. Its now the same price as the plain white pex, so I plumbed the whole place color coded. Easiest plumbing I've ever done. Drill with a 1" bit, and a tubing cutter, and I plumbed the whole 500sqft building with 6 fixtures by myself in about 4 hours.
Kevlar7r is offline   Reply With Quote
Old 06-10-2015, 04:38 PM   #40
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Perry Hall, Maryland
Posts: 5,469
Default

As stated that is the hot water heater. The hoses may have been removed to by-pass the heater when winterized so the heater not to use as much anti-freeze and the heater was just drained. First see if you can tighten them and if not the others have provided info to repair.

BTY the braided line is not marine and is on the Hot side of the plumbing, should not be an issue just letting you know.
__________________

__________________
Mike
mmwjr is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 04:49 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.