Transom Door

[BRitter1]

I got a quoteof $3500 to repair crack in gelcoat on transom door for Maxum 4600.

Seemed excessive but I could br out to lunch.

Anyonw have information about buying a brand new one?

Thanks

[Phillbo]

Going to be difficult to buy a new one. I'd look at having one made.... How bad is the crack? They sell gelcoat repair kits. If you are going to replace you may want to give it a shot on your own.

[dbriceno]

Seems excessive!

[Phillbo]

Are you sure it's gelcoat???

[tim-2]

My transom door cracked down the edge.it was where the door was bonded together .I removed the door pried the crack open a little bit filled it with West Epoxy clamped it. After it cured I ground it out a little with a Dremel tool then filled it with matching gel coat wet sand &buff .lt has never cracked again. It’s been more than 6 years.Less than $50.00.

[shrew]

I had my entire anchor locker hatch rebuilt (2' x2') for $500 (US).

[BRitter1]

I ended up biting the bullet when I had a bunch of other spider cracks fixed. I had tried fixing myself but pleased with my own work. I am impressed by what our marina did.