No power on 2006 Maxum 1900 sr3
Good morning new to the forum and my 2006 Maxum 1900 sr3. Purchased this boat 3 weeks ago. Did a water test and boat was running.
This morning tried to test boat before taking it to the water but I have no power on my gauges or radio. The 12volt outlets have no power. The tilt for the motor works.
Inspected/checked
- run switch on throttle is on
- swapped out battery
- inspect all fuses under the dash ohm out ok
- checked for loose wires and reseated connections
- wiring diagram shows a 50amp circuit breaker mounted on the motor.
- I can press the button but not sure how to check it for continuity
- motor is the mercuiser 4.3 190 hp engine
Any hep would be appreciated
|
Threaded Mode
