Go Back   Maxum Boat Owners Club - Forum > Search Forums
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Showing results 1 to 11 of 11
Search took 0.00 seconds.
Search: Posts Made By: Idaho_2700scr
Forum: Engines 09-18-2019, 03:02 AM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
Mike, I have checked voltage down to the...

Mike,
I have checked voltage down to the starter and have consistent 12.6 volts, I'm going to take it in to a shop, guessing the neutral switch or solenoid on starter. Neutral switch is very hard to...
Forum: Engines 09-12-2019, 02:13 PM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
Mike, I thought it was the ignition switch, I...

Mike,
I thought it was the ignition switch, I checked the voltage at the I position with the key in run position and had 4 volts, I replaced the ignition switch and still does not work (wont crank...
Forum: Engines 09-12-2019, 02:04 AM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
Mike, Checked the Terminal s on ignition switch...

Mike,
Checked the Terminal s on ignition switch 4.5 volts when tried to start, checked red and purple on slave solenoid no volts when trying to start.
Forum: Engines 09-11-2019, 01:05 PM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
Mike, The motor would not crank, I only get the...

Mike,
The motor would not crank, I only get the alarm now. I put my meter last night on the B terminal and had 12.6 volts. I also had 12.6 volts at the 50amp breaker on the engine. I will check the...
Forum: Engines 09-11-2019, 02:50 AM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
mmwjr took the boat to the lake tonight,...

mmwjr

took the boat to the lake tonight, alarm was on this time and the engine would not start. This is the first time that I would not get the motor to turn over completely dead no cranking....
Forum: Engines 09-09-2019, 05:10 PM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
MMWJR This usually means the motor will start,...

MMWJR
This usually means the motor will start, I should have been more clear. The boat is in the my shop not in the water. I'm going to take it to the lake today or tomorrow to dump the black tank...
Forum: Engines 09-04-2019, 08:59 PM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
Well last night I put everything back together, I...

Well last night I put everything back together, I did not see any corrosion on the connector, the alarm is on now so 12v to the ignition switch , tried to see if I could get the alarm to fail by...
Forum: Engines 09-04-2019, 07:11 PM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
Well last night I put everything back together, I...

Well last night I put everything back together, I did not see any corrosion on the connector, the alarm is on now so 12v to the ignition switch , tried to see if I could get the alarm to fail by...
Forum: Engines 08-28-2019, 03:53 AM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
Well I went out and turned the key a no alarm,...

Well I went out and turned the key a no alarm, dead put a volt meter on the b connection and got 2.5 volts, went to the motor and lifted the wire to the 10 pin connector and the alarm started...
Forum: Engines 08-28-2019, 12:26 AM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
I was thinking those items because the wiring...

I was thinking those items because the wiring schematic shows the alarm in the same wiring as the start circuit neutral switch and the emergency shut down switch. I will try to a look for loose...
Forum: Engines 08-27-2019, 10:20 PM
Replies: 28
Views: 3,421
Posted By Idaho_2700scr
2003 2700scr starting issues

Hi I'm new to the forum but have been reading to help figure out my issues. I have had 4 times when my boat 5.7 thunderbolt will not start, no alarm, nothing but I have lights, blower, etc. I thought...
Showing results 1 to 11 of 11

 
Forum Jump

All times are GMT. The time now is 11:52 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.