|
09-12-2011, 10:35 PM
|
#1
|
Lt. Commander
Join Date: Nov 2009
Location: Omaha, NE
Posts: 228
|
white film, chalky residue?
Cleaning things up while re-installing everything... I noticed some white film, chalky residue on the out drive (alpha one). Might just be hard water deposits and CLR does get it off..... Don't think the outdrive is getting hot. Wondering if everyone see this or just me?
__________________
Money pit or not..... you got to love 'em! ~ Darren
|
|
|
09-13-2011, 12:02 AM
|
#2
|
Commander
Join Date: Jul 2011
Posts: 345
|
salt water or fresh water boat? May be dry salt if salt water.
|
|
|
09-13-2011, 12:18 AM
|
#3
|
Lt. Commander
Join Date: Nov 2009
Location: Omaha, NE
Posts: 228
|
Fresh only....
__________________
Money pit or not..... you got to love 'em! ~ Darren
|
|
|
09-13-2011, 12:31 AM
|
#4
|
Commander
Join Date: Jul 2011
Posts: 345
|
|
|
|
09-13-2011, 12:40 AM
|
#5
|
Lt. Commander
Join Date: Nov 2009
Location: Omaha, NE
Posts: 228
|
__________________
Money pit or not..... you got to love 'em! ~ Darren
|
|
|
09-13-2011, 03:56 AM
|
#6
|
Lieutenant
Join Date: Oct 2009
Location: Johnston, Iowa, United States
Posts: 79
|
I have always been told that they will do that if they get too warm. Might want to check into a drive shower like one of these- www.driveshowers.com
|
|
|
09-13-2011, 11:45 PM
|
#7
|
Lt. Commander
Join Date: Nov 2009
Location: Omaha, NE
Posts: 228
|
Geeez 200.00 bucks for a tube with holes in it? This is my next project and I bet I can make the exact same thing for 20 bucks. Will post pics when done
__________________
Money pit or not..... you got to love 'em! ~ Darren
|
|
|
09-14-2011, 01:11 AM
|
#8
|
Commander
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
|
Sorry, gotta ask the obvious here. Why not look into why it is running that hot (if that is indeed what is causing it)? Is it caused by warm water and long runs? Do you have the wrong stat in it (mine uses 160 deg)? Could you be losing cooling water into the bilge?
|
|
|
09-14-2011, 01:28 AM
|
#9
|
Lt. Commander
Join Date: Nov 2009
Location: Omaha, NE
Posts: 228
|
No loss of water, think it just might be the river here... this is my forth alpha drive and they have all done that. White residue on automotive exhaust tips is considered good, I.E. it's not running rich or lean. I truly believe this has much more to do with exhaust than it does with heat.....everything I'm reading says otherwise though.... I will build the shower though.. just because I can.
__________________
Money pit or not..... you got to love 'em! ~ Darren
|
|
|
09-14-2011, 02:44 AM
|
#10
|
Commander
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
|
Quote:
Originally Posted by oneradride
I will build the shower though.. just because I can.
|
NICE
|
|
|
09-14-2011, 01:30 PM
|
#11
|
Admiral
Join Date: Jul 2009
Location: Fairfax Va
Posts: 1,512
|
Quote:
Originally Posted by oneradride
I will build the shower though.. just because I can.
|
Show off.
Interestingly ORR, it all seems to be on the upper portion of the drive - the part that is out of the water when running. And doesn't the exhaust exit the A1 drive from the lower section? Regardless, with your crazy mad fab skillz (wish I was so talented) you can make a shower, clean the gunk off the drive, and give it a go.
Or just run it with the side exhausts open all the time!
Dan
|
|
|
09-15-2011, 02:05 AM
|
#12
|
Lt. Commander
Join Date: Nov 2009
Location: Omaha, NE
Posts: 228
|
Not too crazy.... I just like so save money and have put together a few cool things.....
The Alpha exhaust exits though the prop and on both sides of the trim cylinders as seen here at about 2:46..... Above the cavitation plate....
You are right though.... when in the water.... with the Corsa/captains call open. the back pressure from the lake or river will force most of that out the sides..
__________________
Money pit or not..... you got to love 'em! ~ Darren
|
|
|
09-15-2011, 12:49 PM
|
#13
|
Moderator
Join Date: Apr 2008
Posts: 5,608
|
On my Bravo III, the raw water discharge comes out of the transom collar, not the drive. Do teh Alpha's exhaust through teh drive itself? It was also my understanding that the raw water intake is what cools the drive, not the exhaust. Did you bypass the raw water intake on teh drive with a through hull and remote water pump? If so, then the drive would no longer be getting cooled. If you went with a through-hull running pickup and a remote water pump, then you would NEED to install a drive shower to keep the top end of the drive cool.
It's also my understanding that the chalky buildup on the top end of the drive is typically indicative of overheating. Just a couple of thoughts.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|