Thread Tools Search this Thread Display Modes
Old 11-06-2011, 09:30 PM   #1
Join Date: Nov 2011
Posts: 1
Default Alarm Not Working

I have a 1997 Maxum 2300 SR, 454 Carb engine. The alarm that comes on when you turn the key, and if the water temp, oil pressure etc is out of spec, is no longer working. I disconnected the buzzer under the dash, and there is 12 VDC with the buzzer off, only 600 mvDC with the buzzer back on line. I tested the buzzer with a 12 VDC battery, and it was plenty loud. I trace the wires, purple and tan/blue, and all connections at the water temp sensor, drive oil reservoir, and oil pressure look clean. Help!

secretcajunman is offline   Reply With Quote
Old 11-07-2011, 12:54 AM   #2
oldno7's Avatar
Join Date: Mar 2011
Posts: 372

Not to appear simplistic, but is your tether switch activated?
oldno7 is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 04:48 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.