2011 Refit
Hauled out for bottom P&P, fathometer replacement and tons of other little 'had to be out of the water' jobs.
Back in the water, ready to head home.
New Airmar B744V transducer.
New trim tab actuator.
Priming and painting through hulls.
Took all the through hulls down to bare metal, primed, and painted.
Replaced all zincs and both trim tab actuators.
Bottom painting.
New Mantus 1 anchor (65lbs)
Ready for priming.
Prep'ing running gear
Took all sea suctions down to bare metal, primed and them painted with bottom paint.  AC inlet here.
Growth on port prop - all of the metal (intakes, shafts, props, cutlass bearings, rudders and trim tabs) were covered with tubeworm hard castings.
Old Airmar B44 transducer to come out
Replaced all rocker switches
Love the stripe
Running gear done
Going on the blocks
Stripe done

All times are GMT. The time now is 04:57 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2023, vBulletin Solutions, Inc.