Reply
 
Thread Tools Search this Thread Display Modes
 
Old 03-30-2020, 07:23 PM   #1
Ensign
 
Join Date: Oct 2019
Location: Vancouver
Posts: 13
Default Maxum 3200 Seat and light

I purchased a 1997 maxum 3200 and the port seat falls forward when you sit on it. There is a hook on the stern inside wall which I assume does something. Any ideas?

One of my interior light cover is missing. Any ideas where to get one?
__________________

craigdouglas is offline   Reply With Quote
Old 03-31-2020, 02:45 PM   #2
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

The bottom of the seat should have two tabs that slide into the slots on the 'wall'. I wouldn't know where to get them.

I doubt you'll find just the cover. You'll probably need to replace the light itself. If they haven't yet, it might be a good time to upgrade to LED.
__________________

shrew is offline   Reply With Quote
Old 03-31-2020, 04:37 PM   #3
Ensign
 
Join Date: Oct 2019
Location: Vancouver
Posts: 13
Default

Do you know where to get lights? Is there a picture of the brackets I need for the seat as I am sure what it looks like as I could make them.
craigdouglas is offline   Reply With Quote
Old 03-31-2020, 10:27 PM   #4
CGG
Lt. Commander
 
CGG's Avatar
 
Join Date: Jul 2013
Posts: 186
Default

https://www.sailrite.com/Awning-Track-Flanged-White-48

The link is the wall bracket material you need. Cut to size. Your seat cushions should have brackets that will fit into this channel. I also recommend you go to Home Depot and in their lumber area they have these short table legs that have a mounting plate that I attached to the bottom of the seat. You will need to cut down to size. I have some friends that are heavy and the with 2 of these legs in the middle (one in front and towards the back) support them with no problems.

https://www.homedepot.com/p/Waddell-...2665/100540024
CGG is offline   Reply With Quote
Old 04-01-2020, 03:30 AM   #5
Ensign
 
Join Date: Oct 2019
Location: Vancouver
Posts: 13
Default

Quote:
Originally Posted by CGG View Post
https://www.sailrite.com/Awning-Track-Flanged-White-48

The link is the wall bracket material you need. Cut to size. Your seat cushions should have brackets that will fit into this channel. I also recommend you go to Home Depot and in their lumber area they have these short table legs that have a mounting plate that I attached to the bottom of the seat. You will need to cut down to size. I have some friends that are heavy and the with 2 of these legs in the middle (one in front and towards the back) support them with no problems.

https://www.homedepot.com/p/Waddell-...2665/100540024
I have no brackets on the seat. I just have a metal clip on the stern inside wall beside the seat.
craigdouglas is offline   Reply With Quote
Reply

« Water | Trim Pump »
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:38 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.