Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-15-2012, 03:09 AM   #1
Ensign
 
Join Date: Feb 2007
Posts: 4
Default Trim Up Not Working on Bravo II

The drive trim up switch on my Bravo II outdrive does not work, the trailer button does cause the drive to trim up and the down switch works. From reading various sources of information it could be the trim limit switch needs to be replaced. Upon inspection the wire going to the trim limit switch has a bare spot rubbed in the insulation; this has taken 14 years to develop and could be the problem.
If I need to replace the limit switch on the drive; is there any way to do this without removal of the drive and bell housing?
Any advise would be appreciated.
floatnfun is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 05:11 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.