Go Back   Maxum Boat Owners Club - Forum > Maxum General > Maxum Owners General Discussions
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-20-2017, 02:15 PM   #1
Lt. JG
 
Marty87's Avatar
 
Join Date: Mar 2017
Location: U.K. Scotland
Posts: 36
Default Tilt and trim Hydraulic hose

Hey guys my portside hydraulic hose has disconnected from the back of the stern on the inside of the boat i have had an inspection on trying to reconnect it but because the way the exhaust comes down to the back of the engine it is impossible to get at has any of you guys had this trouble and if so what was your actions
__________________

Marty87 is offline   Reply With Quote
Old 07-20-2017, 04:19 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,219
Default

Try removing the hose manifold on the bottom of the outside transom assembly where the exterior hoses connect. Should be two nuts, this will drop down and the other side is where the interior hoses connect.

Reinstall using a new gasket.

See Mercruiser Manual #14 for illustration.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 07-20-2017, 04:57 PM   #3
Lt. JG
 
Marty87's Avatar
 
Join Date: Mar 2017
Location: U.K. Scotland
Posts: 36
Default Hydraulic hose

Thanks mike boats coming out the water when I'm home from work so will try this method thanks again.
Marty87 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 04:28 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.