Thread Tools Search this Thread Display Modes
Old 05-04-2010, 05:40 AM   #1
Join Date: Apr 2010
Location: Southern OK/North TX
Posts: 2
Default Speedometer Problems

i have a 1999 1900sr and for some reason the speedometer isnt reading anything. Can someone please educate me and what the problem might be and how to possibly correct the problem. thanks!

thegnewman is offline   Reply With Quote
Old 05-04-2010, 02:44 PM   #2
Join Date: Jun 2009
Posts: 83

Hi there, just a suggestion, have you looked at the back of the bell housing, there is a small hose with a snap on fitting twist and pull (the fitting is mostly yellow in colour) the tube attached is what sends pressure + to the speedometer. You should check it may be broken, disconnected or blocked. You may also have a leak in the tube. You could also try disconnecting the tube at the gauge, fit a test tube and blow/suck see if the speedometer movers I have checked a gauge in the work shop these ones take a lot of blowing by mouth, (blowing increases the speed reading on the gauge)
TonyA is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 11:14 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.