Whats going on everyone, i got a 2002 1800 sr with a 3.0 and it’s got a 6,000 rpm gauge and no hour meter on the boat at all and was looking to put one on and found the matching RPM gauge with a hour meter built into it but its a 7,000 rpm gauge if i install this will the RPM’s now be inaccurate or i should have no problems at all???? Thank for the help!!!
Shouldn’t be a problem at all. Just because the ranger is higher has nothing to do with its accuracy. Your engine is only rated for about 4800 max WOT.
RPM Gauge!!!!
Linear Mode
