Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-18-2014, 01:50 AM   #21
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

I just picked up and cleaned the boat out today. I will take some pics of it tomorrow. I will get pics of the engine and the drive.

Sent from my SAMSUNG-SGH-I537 using Tapatalk
__________________

__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 02:24 AM   #22
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

I cleaned the heck out of the boat today.

Some mice infiltrated it over the winter so I have also been in the process of exterminating them lol. Their were little nut shells and other miscellaneous crap all over it lol. Thank god the 3m vinyl mill dew and mold cleaner contained bleach. So not only does the boat look clean it is also disinfected.

I also pulled and unsuccessfully tried to charge the battery. It is shot, and it will need replaced. My girlfriend is already calling it the money pit lol. The battery will have to wait till the first of the month though. Im a disabled vet and uncle sam only pays us once a month on the first. The title, registration, and taxes took all of my extra funds for the month lol. But I still have some time before boating weather comes around up where I live.

Today I also battled the faded exterior of the hull. The maroon and black on it are getting pretty chalky and dull. I unsuccessfully tried 4 different rubbing and cleaning compounds. But there was no miraculous change to its appearance. They would go on good and then after ten min it would fade back to being chalky. Does anyone know of some secret weapon I can use against the foggy hull?

More to come in a few :-)



Sent from my SAMSUNG-SGH-I537 using Tapatalk
__________________

__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 03:25 AM   #23
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,279
Default

The boat vacuum machine has been turned on. It is now firmly attached to your wallet now. It will amaze you the velocity of how fast your hard earned dollars will move in and out of your wallet and attach itself to this bottomless pit called a boat.

Be cautious but have fun.

Roger
biggerseagar is offline   Reply With Quote
Old 05-18-2014, 11:54 AM   #24
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

Quote:
Originally Posted by towdarope View Post
I am sorry I messed up its a 1991and not a 1992.

Sent from my SAMSUNG-SGH-I537 using Tapatalk
I would still think it's and Alpha 1 Gen 2 and not a Gen 1.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-18-2014, 12:00 PM   #25
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

B.O.A.T = Break Out Another Thousand ;-)

Try using 1500 wet dry sandpaper by hand moving back and forth (no circles) on the hull, them buff and wax.

Feel you way around the side of the engine looking for cracks.

Where are you located in PA?
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-18-2014, 12:15 PM   #26
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

Quote:
Originally Posted by mmwjr View Post
B.O.A.T = Break Out Another Thousand ;-)

Try using 1500 wet dry sandpaper by hand moving back and forth (no circles) on the hull, them buff and wax.

Feel you way around the side of the engine looking for cracks.

Where are you located in PA?
I am in Cambria county. Its 1.5 hours north east of Pittsburgh. I will feel around the side of the engine today 4 cracks. I will also take and post some pics for you guys.

Thanks for the help so far, I really appreciate it. :-)

Sent from my SM-T210R using Tapatalk
__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 01:03 PM   #27
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

I got a few pics taken this morning. I also felt around the block of t b e engine and I was unable to feel any noticeable cracks.

Here is the drive








Sent from my SAMSUNG-SGH-I537 using Tapatalk
__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 01:05 PM   #28
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

Here are the first set of photos of the engine









Sent from my SAMSUNG-SGH-I537 using Tapatalk
__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 01:08 PM   #29
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

Some more pics









Sent from my SAMSUNG-SGH-I537 using Tapatalk
__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 01:12 PM   #30
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

Last ones.





Here's the chalky hull lol.



And here is a pic of the 23 year old interior. Cleaned up pretty good for being so old lol.



I will take some more pics of the inside of the boat later.

Sent from my SAMSUNG-SGH-I537 using Tapatalk
__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 01:33 PM   #31
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

OK Alpha 1 Gen 2.

I am a little concerned about the rust on the port side of the block as there may be a crack above.

Do you have a pair of muffs that fit around the water intake on the outdrive and connects to a hose to cool the engine? If so you may want to try using the battery from you car if not to much trouble before buying one on your budget only to discover bigger issues.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-18-2014, 06:03 PM   #32
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

I have some new mufs, and I also have a friend with a marine battery I may be able to borrow.

I was wondering if their is anything I should spray into the cylinders to lubricant them before trying to start it.

Another question is about the fuel that was left in the boat durring the past 2 years. The battery is shot but it still has enough juice to activate the gages, . Luckily the fuel guage shows that the tank is empty but im wondering how much fuel would be left in it. And should I drain what ever is left in the tank out of it?

And whats the easiest way to go about draining the tank?

Sent from my SAMSUNG-SGH-I537 using Tapatalk
__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-18-2014, 06:17 PM   #33
Admiral
 
Phillbo's Avatar
 
Join Date: Mar 2012
Location: Lake Powell
Posts: 1,613
Default

You don't need a marine specific battery to star the engine. The marine batteries are deep cycle used for the house battery.


I would try starting it using a portable gas can first. If the tank is empty add some Sta-Bil and a full load of fuel if the engine runs... Run on the tank for a while and then change the fuel filter.
Phillbo is offline   Reply With Quote
Old 05-18-2014, 06:26 PM   #34
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

As Phillbo said and I think i suggest earlier use a gas can with fresh gas. Remove the small gas line at the tank end that runs to the engine and put it into the gas can with fresh gas. Remove the the spark plugs and add a small amount of engine oil to each cylinder. Remove the coil wire and crank the engine for a few seconds, then re-install the wire and try to start the engine. Don't forget to have the muffs on with the water running.

PS: one of my earlies post told you how to drain the tank.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-19-2014, 02:41 PM   #35
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

If cracking due to freezing you might not see them on the exterior of the block. I'd expect they fracture the water jackets and crack internally. This is why you would see the coffee with cream color, but not dump oil or water into the bilge.
shrew is offline   Reply With Quote
Old 05-19-2014, 04:19 PM   #36
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

Quote:
Originally Posted by shrew View Post
If cracking due to freezing you might not see them on the exterior of the block. I'd expect they fracture the water jackets and crack internally. This is why you would see the coffee with cream color, but not dump oil or water into the bilge.
if this were the case I would expect that by now the water would have melted and be in the oil pan and he would just see a high reading on the dip stick as the engine has not been ran since. Milkey color comes from water/oil/heat.

To my knowledge the thinest part of a block is the water jacket wall to the outside and not internal, but stranger things have happened.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-20-2014, 09:20 PM   #37
Lt. JG
 
towdarope's Avatar
 
Join Date: May 2014
Posts: 18
Default

Sorry I have been so busy and I have not been able to test the engine out yet. I am hoping to get to it this weekend, that is if weather and time permits. Thanks so much for all the useful info so far. :-)

The green horned boater.
__________________
Using Tapatalk
towdarope is offline   Reply With Quote
Old 05-21-2014, 01:18 AM   #38
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

Green horn! I did not know this was a crabbing fleet
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-21-2014, 01:43 PM   #39
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

Quote:
Originally Posted by mmwjr View Post
if this were the case I would expect that by now the water would have melted and be in the oil pan and he would just see a high reading on the dip stick as the engine has not been ran since. Milkey color comes from water/oil/heat.

To my knowledge the thinest part of a block is the water jacket wall to the outside and not internal, but stranger things have happened.
You would certainly know better than me. disregard my previous statement. I'd defer to MMWJR on this one. I think I'm confusing manifold and riser failure.
shrew is offline   Reply With Quote
Old 06-16-2014, 04:00 PM   #40
Ensign
 
Join Date: Jun 2014
Posts: 8
Default

Throttle Linkage Adjustment. Buy a repair manual
__________________

attackgirl is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 07:47 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.