Maxum 2400 Control Box

[Vader]

I have a Maxum 2400, 1995. Im doing a full resto.
I need to replace my controls. I am currently running a Quicksilver 3000.
Is my harness a 3 pin or a 4 blade? Im asking because some mounting bolts are stripped and I would like to order the replacement before I use a crow bar

[mmwjr]

see picture

should have 2 wires for neutral switch
~ 3 wires for tilt control

[Vader]

That's it!! The guy I'm ordering from asked me if it was a 3 pin or 4 pin?

[Vader]

Looks like a 3 blade and 3 pin?

[mmwjr]

I cannot be 100 percent so I would verify what you have