Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-09-2018, 06:10 PM   #1
Ensign
 
Join Date: Aug 2018
Location: West Sussex, England
Posts: 3
Default Maxum 2300SC workshop manual

I have a 1996 maxum 2300sc and the floor of the cuddy has cracked by the cabin door and I need to replace it. Does anyone know of a manual that will show me how much of the interior I am going to have to remove to replace it? I am keen to minimise the upheaval but want to do a sound job before I put my foot through it!

Thanks
__________________

karlthevicar is offline   Reply With Quote
Old 08-09-2018, 10:59 PM   #2
Lt. Commander
 
Join Date: Mar 2018
Location: B.C. Canada
Posts: 128
Default

I don’t believe a manual exists that will actually give you any usable information, if you have a decent fibreglass shop close to you they should be able to lo at it and give you an idea of what you are looking at for work/cost.


Sent from my iPhone using Tapatalk
__________________

__________________
Kellen

2000, 2100SR 5.7 Alpha 1 Gen 2
Overboard is offline   Reply With Quote
Old 08-10-2018, 12:36 AM   #3
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Welcome aboard

There is no manual with such information.

In inside of the hull is only an inch or so below this. Common on boats for this type of rot. I would replace the entire deck. Remove carpet, remove wood, replace wood, glass it add flooring. Several had installed vinyl flooring that is wood looking as an upgrade.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 08-10-2018, 12:03 PM   #4
Ensign
 
Join Date: Aug 2018
Location: West Sussex, England
Posts: 3
Default

Thanks, I was expecting to have to remove the floor but what I don't know is whether I need to remove the seats/bed, fridge unit and toilet plinth because they sit on top of it or whether they are attached to the hull and the floor is suspended off of them.
karlthevicar is offline   Reply With Quote
Old 08-10-2018, 12:19 PM   #5
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Not fimilar with your model but others that I have seen the center floor is a separate piece of plywood.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Reply

Tags
2300sc, cuddy, floor, workshop manual

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 05:17 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.