Helm seat removal

[Uncleted]

Best way to remove Helm seats on my 2002 SCR3300 Maxum. This look like it could be almost impossible, but I'm sure I'm missing something.

[geoffm70]

Figured out I'd have to rip apart the mid-cabin roof, so using a booster instead.

[mmwjr]

I don’t think you need to rip out the head liner but find the screws that go through the fabric instead.

[Uncleted]

See no screws in cabin upholstery. Just don't see any way to remove seats. Can't get to screws under seat. They had to install somehow. Also where could I purchase metal hangers for backrest above rear cockpit. One side hade tiny philip head screws holding but see open area for hangers but none on bulkhead.

[geoffm70]

Originally Posted by mmwjr

I don’t think you need to rip out the head liner but find the screws that go through the fabric instead.

i never found them in my 3200

[shrew]

The headliner is held up by screws. I believe that they mounted the board first, then upholstered the board. I suspect the screws are stainless so trying to use a magnet wouldn't work.

If I were hell bent on getting under there, I'd remove the upholstery first, then remove the board. You'll need to re-install and then re-upholster.