Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-06-2007, 02:48 AM   #1
Ensign
 
Join Date: Jul 2007
Posts: 8
Default Bimini tops???

I have a 2000 maxum sc 2300 and i have the 2 piece full enclosure with the bimini that snaps to the top of the windshield, which is ok but its hard to see out of when driving and is to closed in. Im looking for a bimini top that stands on its own and does not snap to thr windshield does maxum make one like that???
__________________

bmazz007 is offline   Reply With Quote
Old 07-06-2007, 05:25 PM   #2
Lt. Commander

 
Mad Max's Avatar
 
Join Date: May 2007
Location: Commuting weekly from South Central Idaho. Got Water?
Posts: 150
Default

Your nearest dealer can get you about any accessory you want, both manufacture and aftermarket. Keep in mind (no slam to the dealer) that you may pay extra (premium) for their efforts to find, purchase, and install.

The canvas you have is great for weather and shade protection, terrible for driving. I have the same and am looking for a 'bimini' top as well. The bimini is the name given to a specific style of boat top that is open both front and back and can be run at moderate speeds without damage. You can get these yourself at boat accessory web sites like Overton's, iBoats, Boatersworld, etc. Measure the area you want covered and order accordingly. You will need to install the frame mounts and tension clips.

You can also contact a local upholstry/boat top shop (check your yellow pages) as they can build one and install it for you, usually quite less than dealer or even retail online.
__________________

__________________
Mad Max
95 Max 2300SC
Nine Mile Falls, Washington

"If you look like your passport photo, you probably need the trip"
Mad Max is offline   Reply With Quote
Old 07-06-2007, 10:55 PM   #3
Ensign
 
Join Date: Jul 2007
Posts: 8
Default

thanks good info
bmazz007 is offline   Reply With Quote
Old 07-08-2007, 05:22 AM   #4
Commander
 
tglee's Avatar
 
Join Date: Feb 2007
Location: PA
Posts: 334
Default

I purchased mine from GMI.

http://www.gmitopdesign.com/page2-e-us.html

They had the best price for Sunbrella.

__________________
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote."

MMSI# 338052622
tglee is offline   Reply With Quote
Old 07-08-2007, 11:35 PM   #5
Lt. Commander
 
Join Date: Jan 2006
Location: wales uk
Posts: 159
Default

i got one for sale!. :wink:

send me your email address ok.
__________________
maxum 2300sc (1997)
gezy is offline   Reply With Quote
Old 07-08-2007, 11:41 PM   #6
Lt. Commander
 
Join Date: Jan 2006
Location: wales uk
Posts: 159
Default

tglee

i see you are not in much water in that pic. will your boat sit nice if it was to dry out?.or beach.
__________________
maxum 2300sc (1997)
gezy is offline   Reply With Quote
Old 07-09-2007, 03:10 AM   #7
Commander
 
tglee's Avatar
 
Join Date: Feb 2007
Location: PA
Posts: 334
Default

gezy,

I'm not sure. This is a non-tidal lake. I just use the trolling motor to get close and then hop off, pull it in by hand and toss the anchor on the sand.
__________________
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote."

MMSI# 338052622
tglee is offline   Reply With Quote
Old 07-09-2007, 08:15 PM   #8
Lt. Commander

 
Mad Max's Avatar
 
Join Date: May 2007
Location: Commuting weekly from South Central Idaho. Got Water?
Posts: 150
Default

Gotta love the flag! Arrrrrrgggggggggggg!
__________________
Mad Max
95 Max 2300SC
Nine Mile Falls, Washington

"If you look like your passport photo, you probably need the trip"
Mad Max is offline   Reply With Quote
Old 07-09-2007, 09:10 PM   #9
Lt. Commander
 
Join Date: Jan 2006
Location: wales uk
Posts: 159
Default

ok,
i was thinking if it will sit on the beach for the day.when the tide drips off.

or is it safe to do so.i can let the kids loose for a few hrs.and give me time to wash and brush the under side off.
__________________
maxum 2300sc (1997)
gezy is offline   Reply With Quote
Old 07-09-2007, 10:43 PM   #10
Commander
 
tglee's Avatar
 
Join Date: Feb 2007
Location: PA
Posts: 334
Default

gezy

I didn't want to hijack this thread so I started a new one.

http://www.maxumownersclub.com/forum...opic.php?t=341
__________________
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote."

MMSI# 338052622
tglee is offline   Reply With Quote
Old 07-10-2007, 01:26 PM   #11
Lieutenant
 
Join Date: Feb 2007
Location: Atlanta, Georgia
Posts: 57
Send a message via MSN to Flying_Maxum
Default

TGLEE,
That top looks really tall, how high above your head is it when your standing up? I need to get one for my 2100 but have not taken the measurements yet. Do you cruise with yours up and if so how is it holding up? Off topic, did you add the trolling motor? I am looking at putting one on, but want to be able to remove it when I know I am not going to be fishing. I made a removable mount for my last boat that hooked on the front bow rail and rested against the rubber strip on the side, worked pretty good, but was bulky.
__________________
2100 SR2 5.7 - Bat out of hell
Flying_Maxum is offline   Reply With Quote
Old 07-10-2007, 05:12 PM   #12
Commander
 
tglee's Avatar
 
Join Date: Feb 2007
Location: PA
Posts: 334
Default

F_M,

The top is about 6-7" above my head but i'm only 5'9". This seems high to look at, but it works out great when moving around with fishing poles.

When I was shopping for mine I basically had three height choices 30-36", 40-46" and 48-54". You can cut it to get any height you need. I bought the middle one and cut it to about 42"

I have ran pretty fast with mine up and it seems ok, but I don't have a 5.7 . The manufacturer says not to. I normally just fold it back when I'm going to go fast. Just unclip the front straps and go.

I did install the motor myself. I leave my on all the time. We travel down many shallow coves even when not fishing.

My friend has one of these and it works well.





NEW! Electric Steer Quick Release Bracket with Cover (MKA-32)
Designed for fast removal of any Terrova™, PowerDrive™ V2 or PowerDrive bow-mount trolling motor.
New cam-lock design features ultra-tight tolerances that eliminate bracket movement and noise.
Locking lever includes pin and lanyard.
Upper and lower plates include slot for securing with padlock (not included).

Includes composite cover that attaches to lower half of bracket when motor is removed, keeping the deck profile clean.
__________________
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote."

MMSI# 338052622
tglee is offline   Reply With Quote
Old 07-18-2007, 08:47 PM   #13
Ensign
 
Join Date: Apr 2007
Posts: 6
Default Bimini Tops

I have been snooping around this forum for awhile and have picked up some good info. Thank you all.
Since this Bimini Top thing was the center of my research over the colder months I thought I would make my first post for what it is worth.
I have a 1997 2300 SC and absolutely don’t care for the Convertible top that is factory issue. Yes, it is a little older and has suffered shrinkage but the big thing is the lack of headroom and having to zip open a flap to stand up and see out. (that dangling flap drives me nuts).
I have installed bimini tops on a couple other boats I owned but was never real happy because they were generic and seemed flimsy…the kind you get from “outdoor sports” stores.
So one snowy evening last December I started surfing the web for everything I could find on bimini tops. I soon decided I wanted a top with specific height, width, and length dimensions, extra thick wall aluminum tubing, all stainless steel fittings and hardware, Sunbrella fabric, and the ability to store and travel with it in the “radar arch” position.
A couple things I learned were: Never mount the bows to a windshield frame. Our Maxums and Bayliners require that the bow mounts be placed outside the window/side glass. To do this you need a swivel mount that works in any position. (not just on a flat surface like the ones that come with most top kits). This wider mounting also gives you more shade. I have a mooring cover which utilizes the snaps for the convertible top so the wider mounting does not let the mounts or bows interfere with the cover. When determining the height you need: Add six inches to how tall you are and subtract the distance from the mounting location to the floor of the boat and you have the height you need. Important: You may be inclined to start with a higher top figuring you could shorten it if it is too high. Although the main bow can be shortened, the starting height dictates how much it can be shortened due to the location of the other bows on the main bow. For example a 46” bow can be shortened 8” while a 48” bow can be shortened only 4”.
Even though my top was a little more expensive than the run-of-mill top I am pleased with my Bimini. I bought it online and did not know who the manufacturer was until I received it. I later did a web search for the manufacturer, Carver Industries (864-457-5820) and found that I could have saved around $100.00 at another dealer. Oh,well! If you care to, do a search of you own for price but a good starting place is http://www.boatcoversonline.com/.
I am sorry for the length of this post but I hope it helps.
Bluemarsh is offline   Reply With Quote
Old 07-18-2007, 09:36 PM   #14
Admiral

 
seapuppy's Avatar
 
Join Date: Nov 2005
Location: Everett Wa
Posts: 4,681
Default

BM..actually it is a good post... :shock: ....good information to share....thanks for posting and welcome to the zoo...hope you stick around and post to your hearts content......... 8)
__________________
Don't compare your life to others. You have no idea what their journey is all about.
------------------------
SSN683 Association member
Par Excellence
------------------------------
2008 Bayliner 340 - "Wild Whim"
--------------------------------------
I live in my own little world....but it's okay-they know me here!!!

Avid practitioner of the martial art: KLIK-PAO.
Tap-Rack-Bang

Anyone that sez "Size doesn't matter" has never owned a boat!
seapuppy is offline   Reply With Quote
Old 08-13-2007, 12:46 AM   #15
Ensign
 
Join Date: Aug 2006
Location: Lake George, NY
Posts: 6
Default

I had the same problem and just added t rods to tilt the bimini back in the closed position check out my boat picture in the gallery
__________________

__________________
2003 Maxum 2100SC 5.7L Alpha I
<img>https://www.maxumownersclub.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=351&g 2_serialNumber=2&g2_GALLERYSID=c2b1932ca966b9a289f cb92cdc4c8259</image>
Max2100 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Watch me replace a section of floor on my 1998 1900 SR2 Bryan Projects and Customisations 11 07-31-2017 08:36 PM
trailer surge brakes cunuck Maxum Owners General Discussions 5 01-04-2010 12:01 PM
Sold my 1996 2700SCR Aquia Cruiser Maxum Owners General Discussions 1 02-24-2009 02:11 AM
re prop gezy Maxum Owners General Discussions 4 02-24-2009 01:41 AM
microwave turntable bayracerL.I. Maxum Owners General Discussions 3 09-24-2007 02:56 PM

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 01:28 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.