4600 - Bow Side Vent Replacement

[glodaze]

Hello Everyone,

I was wondering if anyone has found a supplier for the outside side vent covers highlighted in the attached picture?

Thanks,

John
2000 4600 SCB
Channel Islands Harbor
Oxnard, CA

[shrew]

What are the dimensions of the vent? Do you have the measurements of the rough cutout?

That doesn't look stock. That looks like a small HVAC hose vent.

Seadog makes flush and flush hose vents in 3" adn 4"

https://defender.com/en_us/catalogse...q=flush%20vent

[glodaze]

Hi Shrew,

Thank you for the reply.

It is a flush mount (like this: https://defender.com/en_us/sea-dog-flush-hose-vent), but it has a portion that allows a hose to go over it that goes inside the cut out hole, like this...(https://www.amazon.com/Five-Oceans-W...07HHCZQHT&th=1)

Actually, I am going to see if this one works...thank you for your suggestion!

Best Regards,
John

2000 4600 SCB, 370 Cummins 6BTA
Oxnard, CA

[shrew]

https://defender.com/en_us/sea-dog-hose-thru-vent

Refined search to "Hoses Through Vent"

[glodaze]

Yes, thank you again for your time and assistance.

John