Maxum 4600 cabinet latches

[iantan]

I was looking to replace some of mine which had faded over the years. I tracked these down which are an exact match Hafele Espagnolette Locks, see attached PDF

I assume they were a standard fit in other boats but not sure,

Ian

Maxum latch.PDF

[shrew]

Measure the rough opening drilled into the drawers. Then find a replacement within those specs. It doesn't need to be the exact same. I wouldn't 'assume' anything.

[iantan]

They are an exact match to the 4600, I have 24 in a bag in front of me which I'll use on my boat.

I prefer to use OEM equipment if possible but I only added the "assume standard fit on others" as i haven't seen the locks on the 3700 or the 4100 to compare.

[kingstonal]

I just replaced mine, on my 4100 sca. I tried to buy from the company that you had in the add, but you have to buy a order of 100. So i found them in Florida brassworks inc. 386 943 8857. I replaced 25 on my boat for 286.00. hope this helps

[iantan]

I don't know what your postage would be to the USA! but all in for 26 it cost me roughly $80. That was a mix of brass and satin nickel as I'm replacing the kitchen units in my 4600 and decided to go satin nickel on those.

Link to UK site https://www.locksonline.com/buy/Push...ess-11236.html

[kingstonal]

the price that i paid was for the whole lock . the knob, the rosette, and the buttom locking mechanism. 286.00