Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-09-2013, 07:48 PM   #1
Ensign
 
Join Date: Nov 2013
Location: Quad Cities Area - Iowa/Illinois
Posts: 1
Default Hull Weakness

Been lurking in the forum for over a year, but first reason to post.

Short back story. . . Purchased a 2003 3300 in May 2012, we love the boat. Used the boat all season with no problems. hauled out and had it blocked for the winter. When putting back in I noticed a crack / separation on both sides of the keel near the blocking. Had mechanic look it over and there had been an obvious previous repair. Assumed the previous repair was not done correctly and paid to have it re fixed. Look great when done. Used the boat all this season with only minor maintenance items to do. Hauled the boat out last week and when it was set on the blocking the hull started to crack again in the same areas. No matter how we blocked the keel it seemed to want to separate. Ended up blocking at the four corners for now.

Does anyone know if there is an issue with Maxums in this size / year range that have hull weakness? Does this boat need to be blocked differently than the norm? Was the second fix just as bad as the first? Not sure where to go from here.

thanks,
__________________

MattK is offline   Reply With Quote
Old 10-31-2022, 04:57 AM   #2
Ensign
 
Join Date: Nov 2020
Posts: 1
Default

I have same question regarding this post anyone have any knowledge or details on this?
__________________

EricH is offline   Reply With Quote
Old 10-31-2022, 02:27 PM   #3
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

The transom is more than likely rotted. Water has gotten into the transom which is a Balsa cored. When water saturates Balsa long enough it turns into a wet paper bag like material.

More than likely water ingression is a result of a failure of the caulk sealing the transom assembly.

To fix it, you'd basically need to remove the engine, cut out the inner skin of the transom in the engine compartment. Then hog out the bad wood. Insert a new sheet of marine plywood epoxy it in, cover it with many layers of fiberglass, then seal it with something like vinylester.
shrew is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.