Have a 95 maxum 3200 scr. When connected to shore water, both hot and cold water works fine.
I filled the potable water tank. I get no cold or hot water in any faucets.
In the galley on the lower left cabinet is a red switch labeled "water", I guess this is supposed to power the pressurized system.
I clicked it, got nothing. Not sure if its supposed to light up or not.
Anyone know if there is a fuse that controls this, and where the fuse may be?
Or if it may be the pump, any idea where it may be? Thanks.
Yes, the red light in the switch should be on. Check for power at back of switch. Water pump is located in aft birth, inside and under closet. Bottom board in closet lifts out.
__________________
__________________
Dezart Elegance Pool Tile Cleaning
1994 Maxum 3200 SCR
Found the pump, thanks. It does work. Lines must have been empty cause it took a while to get water out the faucets. Good thing is all are now working. The pump was cycling, so I checked for leaks. The T&P valve on the water heater releases pressure, I'll get that fixed. As for the water switch, it doesn't light up, but at least the water works. Thanks HavaMax,
Fresh water potable not working.
Linear Mode
