Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-20-2021, 04:49 PM   #1
Ensign
 
Join Date: May 2021
Posts: 6
Default SR2300 Drivers Seat

Was out on the Lake this weekend and got into some pretty rough water. I stood up to access the situation but when I went to sit back down the seat came off the pedestal and fell over. I picked up the seat and put it back post and managed to get back to my dock wobbly and all. Not sure if it is broken or is supposed to do this. It has adjustments for fore and aft and has another lever to allow it to pivot. After looking into it more the lever that allows it to pivot was not going into the hole on the pedestal that locks it in. When I rotated the seat to the point where it locks it is at an angle and not straight. I drilled a hole in the plastic collar at the right position to where it would lock straight. Not sure why or how it would be at an angle. The seat is locked straight now but a little wobble still. Not sure if it can be fixed or if I need to replace it. Anyone dealt with this and can point me in the right direction I would appreciate it.
Attached Thumbnails
Seat Post 1.jpg   Seat Post 2.jpg   Seat Post 3.jpg  
jlasinski is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:59 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.