Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-12-2012, 12:39 PM   #1
Ensign
 
Join Date: Sep 2012
Posts: 2
Default 2600 se boat heigh on trailer

I have a 2007 2600se that I am looking to store in a heated facility. I am looking to buy a venture trailer if I can fit my boat thru the door opening. The door clearance is 9' 10". Does anyone know the height of my boat when it is on a trailer. I do not hve a radar arch.
__________________

Rob Augustine is offline   Reply With Quote
Old 09-12-2012, 12:59 PM   #2
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,294
Default

First welcome...........Rob I hope others will chime in here but most likely it will be a matter of inches when all this is done. You can always let the air out of the tires if it gets real close:-)

Good luck

Roger
__________________

biggerseagar is offline   Reply With Quote
Old 09-12-2012, 05:00 PM   #3
Lt. Commander

 
Join Date: Feb 2010
Location: Half Moon Bay, CA
Posts: 179
Default

Rob ... "welcome to the zoo"

I have the same boat, but the 2006 model, sitting on an EZ loader trailer in my driveway. I'll check the height when I get home and let you know.
__________________
2006 Maxum 2600SE with Mercruiser 5.0L MPI and BIII Drive
iceman is offline   Reply With Quote
Old 09-13-2012, 12:44 AM   #4
Lt. Commander

 
Join Date: Feb 2010
Location: Half Moon Bay, CA
Posts: 179
Default

OK so I measured 10' 4" from the top of the windshield to the ground. I believe my boat sits up higher in the trailer than it might in other trailers, because we had to move the bunks to get them off of thru-hulls and chines, but I'd guess you'll still be higher than 9' 10".
__________________
2006 Maxum 2600SE with Mercruiser 5.0L MPI and BIII Drive
iceman is offline   Reply With Quote
Old 09-13-2012, 02:08 AM   #5
Admiral
 
Phillbo's Avatar
 
Join Date: Mar 2012
Location: Lake Powell
Posts: 1,613
Default

Back it in sloooooowwwwwlllyyy
Phillbo is offline   Reply With Quote
Old 09-13-2012, 04:58 PM   #6
Ensign
 
Join Date: Sep 2012
Posts: 2
Default

thank you for the measurements
__________________

Rob Augustine is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Popular Tags
4.5 1994 1995 maxum 1996 1999 2300 sc 2003 maxum 3300 2007 2600se 2100sc 2300 sc 2600se electricals. 2600se schematic 2800 scr 2800scr 3700 air in water lines basic service bilge pump bimini top boise idaho bow bow thruster cabin heater convertible top cooling cover for ladder cushion cutlass damaged davit electrical excellent cond filler fool fuel consumption fuel economy fuse panel galley galley sink glass hardware highfield 310 hinges hurley latches leaks maintenance manifold maxum 2007 maxum 2400 scr maxum letters mercruiser 4.3 mercruiser shift switch mosel navigation lighting no possible way oil change overheat at speed screw a light here... seals stern thruster stiff steering thruster transom rear door vibration waste pump water in bilge window windshield winterization wiring
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 09:50 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.