Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-15-2011, 11:57 AM   #1
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default What Trailer do I need

When I bought my boat, the previous owner said the trailer was not the right one, How can I find out the proper trailer for my Boat. 92 2100SC
__________________

9Ball is offline   Reply With Quote
Old 08-15-2011, 12:21 PM   #2
Lt. Commander

 
Join Date: Jul 2011
Location: Southwestern Ontario
Posts: 125
Default

Visit a reputable dealer and see what advise they can give. But you need to match the weight of the boat as you'd trailer it - dry plus gear and water etc. to the rating of the trailer, plus always good to add some leeway. Also the style of trailer should match hull design. Bunkers or rollers I'm not sure about though... I prefer bunks myself.
__________________

__________________
1997 1700SR "MaKs RAT attack"
VFF
vffb507 is offline   Reply With Quote
Old 08-15-2011, 02:16 PM   #3
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default

Mine has the Bunkers, and I think its a pain to get the boat centered on them, always pulling up and backing back down into the water to get it centered, I was thinking rolles would center better? and I think to trailer is about 1 ft too short. I'll try to upload a pic in about a hour.
9Ball is offline   Reply With Quote
Old 08-15-2011, 02:29 PM   #4
Admiral

 
ss3964spd's Avatar
 
Join Date: Jul 2009
Location: Fairfax Va
Posts: 1,512
Send a message via Yahoo to ss3964spd
Default

Yeah, hard to say without seeing photos of the boat loaded on the trailer.

Aside from the actual load capacity of the trailer, it needs to be long enough so that when the boat is loaded transom is fully supported by the bunks or rollers, and that the correct tongue weight is on the tow vehicle - proper tongue weight is achived by moving the boat either backwards or forwards on the trailer.

To start, ya really need to have a very close idea of what the boat weighs "wet" (water, gas, oil, etc).

Dan
ss3964spd is offline   Reply With Quote
Old 08-15-2011, 03:16 PM   #5
Commander
 
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
Default

I have a 96 2100SR with the Maxum branded Escort trailer. It is a painted grey bunk style trailer, dual axle, surge brakes on both axles and has MAXUM on the rails towards to the front on each side.
Now with this trailer, my bunks extend out from the back of the transom about 1 inch when the boat is fully up on trailer (front bow eye just at bottom of roller).

Not sure what the 92 came with but maybe this info will help in some way
mcoffey is offline   Reply With Quote
Old 08-15-2011, 03:18 PM   #6
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default

Click image for larger version

Name:	Boat-001.jpg
Views:	5
Size:	38.4 KB
ID:	1484 I have some other pics at home, I can post later tonight. the 2100 SC, seems to be very stern heavy (Aft GC)and as a result not being on the correct trailer the Bow bounces just a little and sometimes the straps on the transom will pop off, now I am not a dummy(just don't ask my 1st wife..LOL) I was a Crew chief on CH-53E's for many years, I have moved some cargo in my day and know how to use the straps. The Boat just moves around too much on the Trailer. Not sure how much tongue weight there is but I feel that it is sufficient, I think the truck (08-F-150 2wd, Crewcab) rearend settles about 3 inches.
9Ball is offline   Reply With Quote
Old 08-15-2011, 03:23 PM   #7
Commander
 
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
Default

Whoops, small correction here. Had it backwards, sorry. When fully up on trailer, transmon overhangs bunk by 1 inch or so. See attached (not so great) pic.

Note that this was before I cleaned the hull, it looks much better than this now
Attached Thumbnails
Before2.JPG  
mcoffey is offline   Reply With Quote
Old 08-15-2011, 04:25 PM   #8
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default

Mcoffey, What kinda boat is it
9Ball is offline   Reply With Quote
Old 08-15-2011, 04:50 PM   #9
Commander
 
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
Default

Quote:
Originally Posted by 9Ball View Post
Mcoffey, What kinda boat is it
Mine is a 96 2100SR.

Not sure how much yours weighs but NADA lists it as Net Wt. 1780 lbs. That just can't be right, can it? Mine shows as 2839 lbs.
Now most single axle trailers can only handle up to 4000 lbs so depending on what this thing really weighs, you may be ok. Maybe it just needs some adjustment. Is the axle bolted to the frame where it coud be slid back if needed?

I did notice the VA stickers, where do you put her? I am in Loudoun County and have mine down at Lake Anna.
mcoffey is offline   Reply With Quote
Old 08-15-2011, 06:48 PM   #10
Admiral

 
ss3964spd's Avatar
 
Join Date: Jul 2009
Location: Fairfax Va
Posts: 1,512
Send a message via Yahoo to ss3964spd
Default

No way a '92 2100 SC weighs less than 2000 like NADA suggests, and not likely that it weighs less than 3K.

The transom is probably around 2" thick, and ties into the sides and the stingers. The engine is sitting on the stringers and the drive is hanging on the transom.

If you are trailering a lot you really do want the bottom of the transom resting on the bunks or rollers.
ss3964spd is offline   Reply With Quote
Old 08-15-2011, 06:57 PM   #11
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default

WOW the NADA says mine is 1780 Lbs. also Lets see.... add gear (200 Lbs), plus gas (30*6.1=183) = 2163 Lbs on the trailer (Mmmmm 3 bags of ice, a case of beer, 3 lbs of fried bird...etc, Tool box) So I guess we might want to say 2400 Lbs just to be safe.

Oh just remembered I am off this friday (CWS Day) I'll "try" to get a weight Friday. I'll tow Boat and trailer to the moving company(they have a scale) then put the Boat in the water, come back and weigh it again (without the Boat) and before Beer is involved .... simple math should tell us the weight of the Boat.


I actually live in Patuxent River MD, and put in on the Base.
9Ball is offline   Reply With Quote
Old 08-15-2011, 07:12 PM   #12
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default

Quote:
Originally Posted by ss3964spd View Post
No way a '92 2100 SC weighs less than 2000 like NADA suggests, and not likely that it weighs less than 3K.

The transom is probably around 2" thick, and ties into the sides and the stingers. The engine is sitting on the stringers and the drive is hanging on the transom.

If you are trailering a lot you really do want the bottom of the transom resting on the bunks or rollers.
Absolutely, I defiantly need to do something, I am thinking maybe move the axle aft about 2 in, and extend the bunkers, I haven’t towed it any distances yet, but I will be next year I am sure. From my house to the Boat ramp on base is like 5-6 miles, and the other Boat Ramp I use is 17 Miles away. Next year I am looking to go places!

Since I just got "The Boat" I don't want to venture to far from home till I know everything is working as it should. I do have a few things I want to fix and I few things I have to fix over the winter, This season is all about having Fun close to home. Almost all my outings are at night, so being safe is important.
9Ball is offline   Reply With Quote
Old 08-15-2011, 08:00 PM   #13
Commander
 
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
Default

Yeah, that weight shocked me too. I mean, how can my bow rider weigh more than a cuddy? They are the same lenghth, I am a bit wider though. Figured they should be close to the same with yours a bit more than mine. Does the trailer still have the capacity label on it? If it does I would be looking at the GVWR once you do know your weight.
And do agree with Dan, the rear does need to be on bunks or rollers (all the way to the end).

So, possible issues I see are:
Trailer too short/small for size/weight of boat (can cause overload or incorrect center of gravity)
Center of gravity is off and you are too tail heavy (adjusting front stop or sliding axle back could correct this)
Tires are shot and she is jumping around like a 1 legged man in a butt kicking contest (I would think you would notice this though)

As far as TW (Tongue Weight) goes, you should be around 10-15 percent of GW (for single axle that is). So if the boat is 3000 lbs, you want about 300 lbs TW.
mcoffey is offline   Reply With Quote
Old 08-15-2011, 08:20 PM   #14
Admiral

 
ss3964spd's Avatar
 
Join Date: Jul 2009
Location: Fairfax Va
Posts: 1,512
Send a message via Yahoo to ss3964spd
Default

Definitely put the whole mess on a scale if you have one available. Pull the trailer and boat onto the scale, unhook the truck, pull the truck off, see what it weighs. You can do the math of the other stuff later. If it's a steel, single axle, trailer I'd guess it weighs around 1000 pounds - maybe even less.

Dan
ss3964spd is offline   Reply With Quote
Old 08-15-2011, 11:42 PM   #15
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default

Having trouble uploading pictures here so I created a sutterfly site for the pictures.. http://theboat92.shutterfly.com/
9Ball is offline   Reply With Quote
Old 08-16-2011, 12:04 AM   #16
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,279
Default

A boat that size just be on a tandem trailer.........
biggerseagar is offline   Reply With Quote
Old 08-16-2011, 12:28 AM   #17
Commander
 
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
Default

I don't know, seems smaller than mine that is for sure. My beam is 8'4" where yours shows to be 7'4". Maybe it does weigh <2000lbs? It is an Escort trailer, same as mine. The sticker is all worn off, same as mine
It seems possible that the trailer is correct (at least in size and capacity) for this boat.

Go ahead and check the scales as you mentioned, that is the only way to know for sure. You can then use a bathroom scale to check the tongue weight once you know total weight.
mcoffey is offline   Reply With Quote
Old 08-16-2011, 12:57 AM   #18
Commander
 
9Ball's Avatar
 
Join Date: Jul 2011
Location: Port St Lucie, FL
Posts: 469
Default

The funny thing is.... The tongue weight I am sure is good... However, the bow of the boat I can pickup with two fingers.
9Ball is offline   Reply With Quote
Old 08-16-2011, 02:20 AM   #19
Commander
 
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
Default

Well that's not good. You should not be able to lift the bow off the front roller with just 2 fingers. Curious if when you lift it like this, is the boat lifting off the front end of the bunks or are you raising the tongue and it is tilting at the axle? The pics seem to show it is pretty far up on the bunks and the bunks are not that short. The axle seems to be towards the stern a bit but have no idea where the C of G is on that. I have the dual axle and yours seems to be close to where my rear axle is (and even seems centered on the bunk). Not sure at this point, still probably good to scale it and check tongue anyway so to see how much she weighs. We know a single axle can only do about 4000 MAX.
mcoffey is offline   Reply With Quote
Old 08-16-2011, 02:28 AM   #20
Commander
 
Join Date: Aug 2010
Location: Purcellville, VA.
Posts: 296
Default

Doesn't look too far off from this 1990 2100SC.
http://www.boattrader.com/listing/19...00-Sc-99195043
The axle actually looks further forward than your and the bunks seem a bit longer but the angle is not quite the same so maybe I am seeing things.
__________________

mcoffey is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 08:15 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.