Go Back   Maxum Boat Owners Club - Forum > Maxum Specific > Sport Boats
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-22-2017, 06:55 PM   #1
Ensign
 
Join Date: Jan 2017
Location: Ocala FL
Posts: 3
Default Trim and tilt

Trim and tilt will not trim up with the switch but will with the trailer up ? 96 3.0 bowrunner 1900 any ideas ?
__________________

Bigg Joe is offline   Reply With Quote
Old 01-23-2017, 01:01 PM   #2
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,603
Default

There should be a trim limiter. If the drive is all the way In (Down), then the trim up will give you about 5-6 'clicks' up. This prevents you from raising the drive too far Out (up) while in gear. The trailer button will raise it the rest of the way.

Try to trim in until it stops. Then try to trim out. If In works and Trailer works, but not Out, then it is more than likely the solenoid on the drive trim pump.
__________________

shrew is offline   Reply With Quote
Old 01-24-2017, 11:05 PM   #3
Lt. Commander
 
mrt214's Avatar
 
Join Date: May 2013
Location: Pittsburgh,Pa
Posts: 175
Default

Make sure all wires connected to pump and solenoid are all clean and have good connections.
__________________
Mike
mrt214 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.