Galley sink on a 2003 maxum 3300

[Wkbrdr1]

Hey everyone,

I have a 2003 maxum 3300 that I have been making upgrades to since I purchased the boat in 2020. My latest project is replacing my galley sink. The original sink has a few pits in it and recently has started leaking water into the drawer under it. I have removed the sink, the opening in the counter is 13 inches wide by 15 inches front to back. The sink itself when I pulled it out is 14 inches edge to edge by 16 inches edge to edge and looks to be about 6 inches total depth. If anyone has taken on this project and has any information to where I could find the sink it would be greatly appreciated. TIA

[shrew]

There are a couple of options.

1) Find a sink slightly larger and increase the size of the rough cut opening in the counter.

2) Find a sink with slightly different dimensions, then buy a piece of starboard, cut the inner rough cut of the starboard to accommodate the new sink. Cut the outer shape to cover the existing rough cut hole. This may also require some slight modification to the rough cut hole.

Search marine and RV suppliers to find the sink that is closest.

You can try for an EXACT replacement, but that might be challenging.

Also sinks have multiple dimensions. The W x L of the basin and the W x L of the flange. My assumption is that 14 x 16 is the flange measurements.

[shrew]

https://www.webstaurantstore.com/vol...UaAu7hEALw_wcB

[yahoo82]

Check out whale and scandvik