Go Back   Maxum Boat Owners Club - Forum > Maxum General > Maxum Maintenance
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-09-2019, 04:45 PM   #1
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default What to use?

I have an 5.0l carb engine in my 01 Maxum 3000 scr that has some issues. It will run for about 10 seconds then quit. I have had enough of boating this year and the boat gets hauled out next wednesday. I am getting it looked at in the spring. I do my winterizing myself. when its on the hard.

I am wondering what I could use to heat up the oil in this engine so its not a pain to do. I have the oil draining tube that I stick out the bilge drain hole that is attached to the bottom of the oil pan.

Thanks

Roger
__________________

biggerseagar is offline   Reply With Quote
Old 10-09-2019, 05:28 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,219
Default

Try an electric dipstick heater.

Regarding the engine I think yours has electric fuel pump and the oil pressure switch that powers it may be bad. Pump gets power from the starter when cranking then the oil pressure switch closes when engine starts and provides power. No power the engine runs out of fuel.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 10-09-2019, 08:22 PM   #3
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

Thanks Mike. Should I try to match the length of the electric dipstick heater to the oil stick?

I'm so sick of boating because of what has happen to the boat in the last 2 months with the shift cable and other things I'll wait another year.

Roger
biggerseagar is offline   Reply With Quote
Old 10-10-2019, 01:29 AM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,219
Default

Quote:
Originally Posted by biggerseagar View Post
Thanks Mike. Should I try to match the length of the electric dipstick heater to the oil stick?

I'm so sick of boating because of what has happen to the boat in the last 2 months with the shift cable and other things I'll wait another year.

Roger
Roger yes you want it no shorter than the existing dipstick, it can be longer.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 10-10-2019, 01:58 PM   #5
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,603
Default

You should be able to drain it through the drain plug hose, but at ambient air temperature it will take several hours. I've successfully pumped unheated engine oil as well. getting an initial vacuum takes a while and it is also a slower process, but not impossible.

I had to pump a qt of diesel oil through the dipstick with a mini hand pump with oil at 50 degrees last spring. It took me about 1 hour, but was possible. I certainly wouldn't want to do all 11 qts.
shrew is offline   Reply With Quote
Old 10-11-2019, 04:49 PM   #6
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

Thanks Shrew! I'm going to NAPA to buy a dipstick heater.

Hey Mike....about the your take on what might be wrong....are saying to change the oil sending unit and see if the works?

Roger
biggerseagar is offline   Reply With Quote
Old 10-11-2019, 06:20 PM   #7
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

Nevermind Mike LOL...I got the service manual out and looked it up. Should have done first.

Roger
biggerseagar is offline   Reply With Quote
Old 10-11-2019, 09:37 PM   #8
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,219
Default

Not the oil sending unit but the oil pressure switch which is located where the oil filter or adapter connects to the block. Rear portside
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.