Go Back   Maxum Boat Owners Club - Forum > Maxum General > Maxum Maintenance
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-27-2014, 01:35 AM   #1
Lieutenant
 
cdhunter's Avatar
 
Join Date: Aug 2012
Location: North Bend, WA
Posts: 80
Default Whale Transom Shower Door Replacement

The door for the Whale shower on the swim platform is cracked and I would like to replace the door, but I am not certain of how to install the replacement door without damaging it. Does anybody have and guidance on how to replace the door?
Name:  whart2648.jpg
Views: 34
Size:  3.6 KBClick image for larger version

Name:	$_57.jpg
Views:	18
Size:	146.8 KB
ID:	3311

Thanks,
Chris
__________________

cdhunter is offline   Reply With Quote
Old 04-27-2014, 10:40 AM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

So you were able to buy a replacement door?

Can you post a close up of the hing section on the main housing? I don't recall if there are screw in hinges or it just snaps in. I won't be back to my boat till next weekend but will look at mine then.

Maybe some else knows.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-27-2014, 03:45 PM   #3
Lieutenant
 
cdhunter's Avatar
 
Join Date: Aug 2012
Location: North Bend, WA
Posts: 80
Default

I will not be back to my boat until next weekend either so I wont be able to get any close up pics, but I did not see any screws. I am guessing it snaps in, but wanted to get a confirmation. I found the replacement door for $13.00, so I may just buy it and try to snap it in and then spend $120 or so for the whole unit if the door breaks during installation.
__________________
"Firefly" - 2003 Maxum 3100 SCR Twin 5.0L/BIIIs
cdhunter is offline   Reply With Quote
Old 04-27-2014, 08:11 PM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

Let us know how it works out.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-27-2014, 08:33 PM   #5
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

I think......it presses in to mount it and being very careful just snap off to remove.

Roger
biggerseagar is offline   Reply With Quote
Old 04-28-2014, 04:37 PM   #6
Lieutenant
 
cdhunter's Avatar
 
Join Date: Aug 2012
Location: North Bend, WA
Posts: 80
Default

Quote:
Originally Posted by mmwjr View Post
Let us know how it works out.
Will do
__________________
"Firefly" - 2003 Maxum 3100 SCR Twin 5.0L/BIIIs
cdhunter is offline   Reply With Quote
Old 04-28-2014, 04:40 PM   #7
Lieutenant
 
cdhunter's Avatar
 
Join Date: Aug 2012
Location: North Bend, WA
Posts: 80
Default

Quote:
Originally Posted by biggerseagar View Post
I think......it presses in to mount it and being very careful just snap off to remove.

Roger
Thanks for the info...I will get to experiment on the "being very careful" part when I remove what is left of the old door.
__________________
"Firefly" - 2003 Maxum 3100 SCR Twin 5.0L/BIIIs
cdhunter is offline   Reply With Quote
Old 05-03-2014, 12:24 AM   #8
Lieutenant
 
cdhunter's Avatar
 
Join Date: Aug 2012
Location: North Bend, WA
Posts: 80
Default

I was able to replace the door by removing the (6) screws that fasten the shower assembly to the transom and then the door pins slide out of the hinges toward the rear of the assembly. I will take pics and post them if my description does not make sense.

Chris
__________________
"Firefly" - 2003 Maxum 3100 SCR Twin 5.0L/BIIIs
cdhunter is offline   Reply With Quote
Old 05-03-2014, 11:10 AM   #9
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

Quote:
Originally Posted by cdhunter View Post
I was able to replace the door by removing the (6) screws that fasten the shower assembly to the transom and then the door pins slide out of the hinges toward the rear of the assembly. I will take pics and post them if my description does not make sense.

Chris
I am following you but pictures may be helpful to others.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-04-2014, 07:36 PM   #10
Lieutenant
 
cdhunter's Avatar
 
Join Date: Aug 2012
Location: North Bend, WA
Posts: 80
Default

I will take some pics and post them next time I get down to the boat.
__________________
"Firefly" - 2003 Maxum 3100 SCR Twin 5.0L/BIIIs
cdhunter is offline   Reply With Quote
Old 05-19-2014, 03:44 AM   #11
Lieutenant
 
cdhunter's Avatar
 
Join Date: Aug 2012
Location: North Bend, WA
Posts: 80
Default

In order to replace the access door on the transom shower it is necessary to remove the (6) screws, circled in red and then pull the shower housing away from the transom approximately 1/2".
Now position the old door so that the hinge pivots on the access door move toward the transom and out the hinge pockets in the shower housing. Install the new access door in the reverse order.
Click image for larger version

Name:	tran shower.jpg
Views:	9
Size:	96.8 KB
ID:	3357
__________________

__________________
"Firefly" - 2003 Maxum 3100 SCR Twin 5.0L/BIIIs
cdhunter is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 01:49 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.