So you removed the two pieces of the one flapper as well both mounts and cannot find the other two pieces. Have you verified no pieces made their way into the outdrive? If so they probably went all the way through.
I would install new ones and put it back together. Once started use a IR temp sensor to measure each exhaust side to see if one is getting too hot. Also running on muffs verify water is coming out the two ports on the transom assembly just in front of where the rams attach.
__________________
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2
Mike
|