Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-02-2015, 02:25 AM   #1
Lt. Commander
 
Join Date: Jan 2014
Posts: 244
Default Bravo 3 question

I'm going to pull the outdrive to inspect the bellows, grease shaft, inspect bearing, and replace the O rings where the drive meets the gimbal housing.
1998 maxum 2800 scr
Question is. I'm surprised there isn't a gasket or something where the outdrive meets the gimbal housing.
I know there are individual O rings for for the shifter cable and water jacket etc. But what keeps water out of the area that the shaft goes into By the gimbal bearing?
Basically where the drive meets in the large bellow.
Thanks for any info!
BB
__________________

Baby Blue is offline   Reply With Quote
Old 04-02-2015, 02:16 PM   #2
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

Have you removed the drive? There should be a large somewhat rectangular O-ring for that.
shrew is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 07:36 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.