Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-29-2017, 01:37 AM   #1
Ensign
 
Join Date: Sep 2017
Posts: 6
Default recommended cruising rpm

Hey guys, you helped me get all the components up and running. Thanks again. Went on my first three hour cruise yesterday and all went well except I am uncomfortable with how much rpm I had to turn to go 20 mph. I was at 4000. I thought I should be closer to 3300. What can I rely on to not overwork the engine. Not really interested in speed. Want the engine to last. It is an 01 6.2 MPI. The new ones say 3500 is not a problem. Should this be true for my older model. All other things being equal. I forgot to look at the hours. I'll up date.
__________________

jtsevier is offline   Reply With Quote
Old 09-29-2017, 02:19 AM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

What boat model do you have? What is the WOT? Should be 4400-4800.

I agree you should achieve 20 mph at a lower rpm.

How many people and gear weight do you have onboard?
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 09-29-2017, 03:18 AM   #3
Ensign
 
Join Date: Sep 2017
Posts: 6
Default

I just purchased an 01 SCR 2900. Had it for 6 month and finally got it in the ocean and just made a three hour trip. I was so proud as it was my first time on the ocean. But I felt like I was have to push the rpm to get anywhere. The new 6.2s indicate sustained 3500 is no problem. I just want to make sure. This trip, I only had two lite people and about 15 gallons of water. Now waste water. And a full fuel load which is supposed to be 103 gallon. Im not to sure of that because I can't find a manual that will tell me for sure.
jtsevier is offline   Reply With Quote
Old 09-29-2017, 11:26 AM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Quote:
Originally Posted by jtsevier View Post
I just purchased an 01 SCR 2900. Had it for 6 month and finally got it in the ocean and just made a three hour trip. I was so proud as it was my first time on the ocean. But I felt like I was have to push the rpm to get anywhere. The new 6.2s indicate sustained 3500 is no problem. I just want to make sure. This trip, I only had two lite people and about 15 gallons of water. Now waste water. And a full fuel load which is supposed to be 103 gallon. Im not to sure of that because I can't find a manual that will tell me for sure.
The ocean can have strong currents and wave action. If you were motoring against the current that could explain the slower speed at this rpm. How does it perform when on inland water?
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 09-29-2017, 02:22 PM   #5
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

Is this a single 6.2? or Twins? 4,000rpm sustained should be fine. I could run my 8.1 at around 3,800 to maintain an average of 22-25 kts. Tide current and sea state will have a lot of impact. 3kt tide is common. running wind and a head sea vs. a following sea will also have impact. Running with a tide and following sea vs opposing both can be the difference between 20 - 21 kts and 25-26 kts for the same rpm.

What really matters is where the Max RPM is at Wide Open Throttle (WOT).
shrew is offline   Reply With Quote
Old 09-30-2017, 07:01 PM   #6
Ensign
 
Join Date: Sep 2017
Posts: 6
Default

Thanks again. Not really worried about how fast I go. Just want to make sure I am not over doing the rpm on my single engine 2001 6.2. It is running great, just a little rich, and I don't want to burn it up. Especially not 20 miles out.
jtsevier is offline   Reply With Quote
Old 09-30-2017, 07:57 PM   #7
Admiral
 
Phillbo's Avatar
 
Join Date: Mar 2012
Location: Lake Powell
Posts: 1,613
Default

The sweet spot on my 6.2 is about 3400-3600.
Phillbo is offline   Reply With Quote
Old 10-02-2017, 01:01 PM   #8
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

01 2900 with a single 6.2?? I didn't even know they made a 2900 in a single. That 6.2 is a re-power. I'm surprised they went with that engine. It has high HP but not the torque of the 8.1.
shrew is offline   Reply With Quote
Old 10-02-2017, 04:15 PM   #9
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Quote:
Originally Posted by shrew View Post
01 2900 with a single 6.2?? I didn't even know they made a 2900 in a single. That 6.2 is a re-power. I'm surprised they went with that engine. It has high HP but not the torque of the 8.1.

Like the 2800 the 2900 was available with a single BBC 7.4 and the 6.2 is being pushed as a common replacement for it but as shrew says it's torque is less. I have read some are happy with the 6.2 and some are not. It is lighter and has higher HP.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 10-05-2017, 03:22 PM   #10
Lieutenant
 
Join Date: Feb 2014
Location: Seattle, WA, USA
Posts: 73
Default

Your best cruising rpm is at at the speed where the boat is just about to come off plane, but stays up on plane. That's your most fuel-efficient speed.

Like the commenters above noted, you may have been fighting tidal or other currents. I've had situations where my boat dropped from regular cruising speed (~25kn @ 3500rpm) to 16kn with no drop in engine speed or loss of plane because I was motoring into a strong tidal current.

Low speed at high rpm can also mean you have the wrong props or your outdrives may be messed up in some way.
__________________

ertyqway is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.