Go Back   Maxum Boat Owners Club - Forum > Maxum General > Engines
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-28-2020, 06:00 PM   #1
Lt. JG
 
Join Date: Feb 2018
Location: Seattle
Posts: 36
Default GM 305 5.0 temperature

Hey Guys ,
Just wanted to get your thoughts. Was very got here in Seattle yesterday 93 degrees. Had the boat out running across the lake and temperature went up barely past 175 maybe 180. Usually runs a little less or right at 175. Don't think I have seen it do this only had it 2 years but I think yesterday is the hottest I had it out. As soon as I came off plane it dropped to below 175 again. I think with the temps being as high as they were is what it is. I did let then engine sit and idle with fan on a few minutes before shut her down. I know 180 is nothing to worry about but also concerned about impellar failure has been on my list to change.

Anyone else see slight temp increase on hot days ?
Thanks
Sand
__________________

Sandrager is offline   Reply With Quote
Old 07-28-2020, 10:05 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

I prefer to use a IR temp sensor and take readings of the thermostat housing and exhaust components to get a feel for the helm gauges accuracy and have found it to be up to 10* higher than the IR readings.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:29 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.