Reply
 
Thread Tools Search this Thread Display Modes
 
Old 11-27-2021, 05:24 PM   #1
Ensign
 
Join Date: Nov 2021
Posts: 4
Default Electrical

2000 2800 scr twin 4.3 liters, starboard engine is shot, to get port engine to run had to jump 12 volts to the positive side of coil, without 12 volts to the coil engine would only run when the starter was engaged, if you released the ignition switch to the on position it would cut off. Anyone know where to look for the fix on this? Any help is appreciated, thanks zeeya31
__________________

zeeya31 is offline   Reply With Quote
Old 11-27-2021, 10:16 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Potentially faulty ignition switch. Verify 12V on the “I” terminal when the key is in the run position.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 11-27-2021, 10:56 PM   #3
Ensign
 
Join Date: Nov 2021
Posts: 4
Default

Switched the starboard ignition switch to the port side, did the same thing. But I will check the terminal with test light thanks
zeeya31 is offline   Reply With Quote
Old 11-27-2021, 11:18 PM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Interesting as the start position should only deliver power to the slave soleniod on the yellow/red wire while the purple wire proves power to the ignition system when in the run position. Could the wires be crossed?
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 11-27-2021, 11:40 PM   #5
Ensign
 
Join Date: Nov 2021
Posts: 4
Default Ignition switch

I will verify the wires are connected to proper terminals thanks
zeeya31 is offline   Reply With Quote
Reply

Tags
2800 scr, 4.3 engines, electrical, sterndrive problems

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 10:01 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.