Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-19-2015, 12:22 PM   #1
Ensign
 
Join Date: Jun 2015
Location: Buford, GA
Posts: 3
Default Trim up/down

I have a 2001 2100 SD. The trim down button works and the trailer tab works but the Trim up tab doesn't? Any idea what I can check? Has anyone had this issue before?
__________________

cprince259 is offline   Reply With Quote
Old 06-19-2015, 12:37 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

Trim limit switch is bad. It is located on the side of the gimbal ring on the outside transom assembly.

It is there to prevent you from raising the drive to far when operating the boat. The trailer button bypasses it to raise the drive all the way.

I would leave it be until it's time to replace the bellows as the wires are way back there.

Look and you will probably see the wires are broken off the switch that looks like a round puck.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 06-19-2015, 11:13 PM   #3
Commander
 
dronthelake's Avatar
 
Join Date: Sep 2010
Location: Chatlotte, NC (Lake Norman)
Posts: 253
Default

Mike's though is a possibility. I had the same switch go bad on 1994 Regal. Check the switch for continuity.
__________________
David & Carol
Charlotte, NC (Lake Norman)
3700 SCR "Comfortably Numb"
dronthelake is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 12:12 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.