Go Back   Maxum Boat Owners Club - Forum > Maxum General > Electronics
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-07-2016, 12:31 PM   #1
Ensign
 
Join Date: Jun 2016
Posts: 3
Default A little help please.

Hi Guys, I have just recently bought a 2400SCR 2006/2007, 200 hours fully serviced, everything has been great until last weekend when while cruising along an audible alarm sounded 2 short beeps, every 30 seconds or so, all dials ok no visible signs of a problem, so pottered back to the marina, to take a look all levels seemed fine, so I asked the marine mechanics to read the ecu (I think that's right) he came back with a long printout saying " there's nothing much wrong only small bits and pieces showing on the read I was ok to take the boat out) so I did and everything was fine but every now and then I get these two beeps and now it sounds two beeps when I turn the ignition and start her up, I don't have a manual with the boat and I would like to know if there a different beeps for different faults? if that makes sense. I can let the guys fault find the problem however, I'm a little concerned that's like giving them a open check book and I'm not in a rush to do that. I have tried downloading a manual but it doesn't seem to a trouble shooting problem section, any help or pointers would be really appreciated, cheers Andy
__________________

andyscholes is offline   Reply With Quote
Old 06-07-2016, 03:55 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,221
Default

The 2 beeps can have 1 of 36 faults. Here is the fault list and with the print out one should be able to determine the cause.

Merc fault codes.pdf
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 06-07-2016, 04:45 PM   #3
Ensign
 
Join Date: Jun 2016
Posts: 3
Default

Hi Mike,
that's just what I was hoping there would be, Ill check it against the print out.

Thanks very much for your help.
Andy
andyscholes is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 03:36 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.