Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-22-2025, 10:44 PM   #1
Ensign
 
Join Date: Jul 2025
Posts: 6
Default 1998 1900xr

Hi all! Today I learned that I have been gifted my dad’s 1998 1900XR that he bought new. It’s a beautiful boat and together over the years we have made sure to keep it well maintained. It’s been garage kept its entire life and we have consistently had it on the lake every year.

It has been getting a little more difficult to keep the original Force 120 outboard going, but it’s still chugging! Just likes to stall when going from Rev - N - Fwd and vice versa.

Anyways, dad decided he wanted to get a new deck boat and he said the dealership wasn’t going to give him anything for the Maxum so he called me up and said that I can come pick it up after his new one gets in the water (30 day quarantine for new boats even at his lake).

Luckily I know this boat pretty well since it’s been in the family since new. Looking forward to being her sole caretaker and creating similar memories my dad did with me with my family.

I don’t have any pictures right now. But she’s the teal / taupe grey color scheme.
__________________

2DEUCE2 is offline   Reply With Quote
Old 07-23-2025, 12:11 AM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 11,010
Default

Welcome aboard and congratulations on the new to you boat.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 07-23-2025, 02:08 AM   #3
Ensign
 
Join Date: Jul 2025
Posts: 6
Default

Quote:
Originally Posted by mmwjr View Post
Welcome aboard and congratulations on the new to you boat.
Thank you! I’m excited to do the little things that have been bugging me. The steering wheel wood is delaminating so I want to change that and I need to replace some of the wood/carpet bumpers on the trailer. Specifically the ones by the wheel fenders. They’ve been good enough for the 3 mile tow to the ramp from my dad’s house but I’m going to tow her 400 miles south. Want to do that before I do that to protect the gel coat.

Other than that, she’s ready to rock!
2DEUCE2 is offline   Reply With Quote
Old 07-23-2025, 12:30 PM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 11,010
Default

With a 400 mile tow be sure the trailer wheel bearings are in good shape and greased.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 07-25-2025, 02:49 AM   #5
Ensign
 
Join Date: Jul 2025
Posts: 6
Default

Great advice. Thanks!
2DEUCE2 is offline   Reply With Quote
Old 07-25-2025, 03:42 PM   #6
Lt. JG
 
Join Date: Aug 2019
Location: Utah
Posts: 22
Default

And make sure the trailer tires are not aged out. Trailer tires are not rolled as much as vehicle tires so they can age out pretty fast (5 years). I buy new tires for my trailers every 5-6 years regardless of tread wear.

Gary
Huuligan is offline   Reply With Quote
Old 07-25-2025, 04:13 PM   #7
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 11,010
Default

Quote:
Originally Posted by Huuligan View Post
And make sure the trailer tires are not aged out. Trailer tires are not rolled as much as vehicle tires so they can age out pretty fast (5 years). I buy new tires for my trailers every 5-6 years regardless of tread wear.

Gary
Exactly. Look for cracks in the side walls that expose the internal cords. If you see cord or a lot of cracks replace them.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 07-28-2025, 01:43 PM   #8
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,903
Default

Even when they get used, trailer tires have relatively low duty cycles. I tow 13 foot Boston Whaler between Florida and New England every six months (about 1,200 miles each way). I get 1 round trip before the tires start to delaminate. It'll happen at some point when I'm towing locally or somewhere during my 3rd trip up or down. So I figure trailer tires are probably good for around 3,000 miles.

However I admit these small trailers were also not designed to run 65+ for 12 straight hours either. I'll remove, inspect and re-grease the bearings every 2400 miles. I'll get the occasional bearing start to stick between 2K - 4K miles.
__________________

shrew is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Popular Tags
#engine #drainplugs #scr 4.5 1994 1999 2300 sc 2000 maxum 1900 2007 2600se 2100sc 2600se electricals. 2600se schematic 2800 scr 2800scr 3700 4600 air in water lines bimini top bow bow thruster bulkhead cabin cabin heater construction photos convertible top cooling cover for ladder cutlass damage davit engine bay filler fool fuel economy fuse panel glass hardware highfield 310 hinges hull photos hurley interior latches leaks maintenance manifold maxum 2400 scr maxum letters mercruiser 4.3 mercruiser shift switch mosel navigation lighting no possible way oil change overheat at speed polystyrene blocks raised maxum letter u screw a light here... seals seating servicing stern thruster stiff steering stringers thruster transom rear door vacuflush vibration visibility water in bilge window windshield wiring
Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 08:34 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.