Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-18-2018, 12:45 PM   #1
Lt. JG
 
Join Date: Jun 2018
Location: Michigan
Posts: 48
Default outdrive trim

My left outdrive only lifts up about one third of the way and then stops. The motor is new and it also stops, would this just be the stop sensor???
__________________

jeffronin3 is offline   Reply With Quote
Old 07-18-2018, 04:03 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 6,443
Default

Is this happening when using the trim up switch? If so the trim limit switch needs adjustment, it's located on the side of the gimbal ring. Loosen the two screws and rotate it until proper trim up is achieved. Note it should only trim all the way up by using the trailer button.
__________________

__________________
Mike
mmwjr is offline   Reply With Quote
Old 07-18-2018, 04:48 PM   #3
Lt. JG
 
Join Date: Jun 2018
Location: Michigan
Posts: 48
Default

Ok thank you I will check this this weekend. Thank you again. And by the way is this in the engine compartment?
jeffronin3 is offline   Reply With Quote
Old 07-18-2018, 05:01 PM   #4
Admiral
 
Phillbo's Avatar
 
Join Date: Mar 2012
Location: Arizona
Posts: 1,011
Default

No, on the transom just below the outdrive.
Phillbo is offline   Reply With Quote
Old 07-18-2018, 05:03 PM   #5
Lt. JG
 
Join Date: Jun 2018
Location: Michigan
Posts: 48
Default

Can this be done while the boat is in the water?
jeffronin3 is offline   Reply With Quote
Old 07-18-2018, 05:28 PM   #6
Commander
 
Gugi47's Avatar
 
Join Date: Apr 2018
Location: Lancaster Pennsylvania USA
Posts: 323
Default

Quote:
Originally Posted by jeffronin3 View Post
Can this be done while the boat is in the water?
Yes if you know what you doing.......
__________________
If they respect you, respect them. If they disrespect you, still respect them. Do not allow the action of others to decrease your good manner, because you represent yourself not others.
-2001 Maxum 2100 SR2 Sport -1997 Regal 258 Commodore (Sold)
Gugi47 is offline   Reply With Quote
Old 07-18-2018, 05:31 PM   #7
Lt. JG
 
Join Date: Jun 2018
Location: Michigan
Posts: 48
Default

Ok not so sure what I'm doing so probably going to have to wait until winter since I'm in Michigan lol. Thanks again!!!
jeffronin3 is offline   Reply With Quote
Old 07-18-2018, 10:08 PM   #8
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 6,443
Default

Quote:
Originally Posted by jeffronin3 View Post
Ok not so sure what I'm doing so probably going to have to wait until winter since I'm in Michigan lol. Thanks again!!!
Oh so next week.

Itís one of those round pucks on the side of the transom assembly.
__________________
Mike
mmwjr is offline   Reply With Quote
Old 07-19-2018, 11:30 AM   #9
Lt. JG
 
Join Date: Jun 2018
Location: Michigan
Posts: 48
Default

Yeah I've been looking at manuals and videos on how and what and where. Thanks again.
And only expecting up to two inches of rain this weekend not snow yet lol.
__________________

jeffronin3 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:40 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.