Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-03-2018, 12:07 PM   #1
Lt. JG
 
Join Date: Jun 2018
Posts: 25
Default Maxum 2400scr 1998 cabin door

I need to replace my cabin door on my 1998 Maxum 2400scr. Any suggestions on where I can get this?
__________________

Earl0523 is offline   Reply With Quote
Old 06-03-2018, 12:26 PM   #2
member
 
Join Date: Apr 2018
Posts: 346
Default

Welcome aboard.
Approx 48 H x 24W x 3/8 thick acrylic?
If you lucky and find one, would be minimum $500.
Why you don't buy the material and drill it after the old one?
You will save tons of money.
__________________

Gugi47 is offline   Reply With Quote
Old 06-03-2018, 03:10 PM   #3
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

You’ll need to make a replacement yourself or have it made for you.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 06-08-2018, 03:13 AM   #4
Lt. Commander
 
Join Date: Jan 2014
Posts: 244
Default

Not sure if this will work for you but see my thread on starboard material cabin door.

http://www.maxumownersclub.com/forum...door-8099.html
Baby Blue is offline   Reply With Quote
Old 06-08-2018, 12:05 PM   #5
Lt. JG
 
Join Date: Jun 2018
Posts: 25
Default

Baby Blue- Did you route both sides on the Starboard for the door? 1/8"?
Earl0523 is offline   Reply With Quote
Old 06-08-2018, 12:12 PM   #6
Lt. Commander
 
Join Date: Jan 2014
Posts: 244
Default

Quote:
Originally Posted by Earl0523 View Post
Baby Blue- Did you route both sides on the Starboard for the door? 1/8"?
I cut it on my table saw with a triple chip carbide blade. Makes for little Kerf marks but you can sand it if needed with 220 then 320 for nice finish if needed.
Then put a 1/4" round over on all sides and front and back with router.
Hope that helps
BB
Baby Blue is offline   Reply With Quote
Old 06-08-2018, 02:37 PM   #7
member
 
Join Date: Apr 2018
Posts: 346
Default

You can get that in smoke tint color #2370 Bronze 3/8". You can't see in but you see out. Just a suggestion.
0.375" X 24" X 48" 2370 Bronze Plexiglass Acrylic Sheet
Gugi47 is offline   Reply With Quote
Old 06-08-2018, 03:29 PM   #8
Lt. JG
 
Join Date: Jun 2018
Posts: 25
Default

Thank you Gugi47- Does it come with the edges finished? rounded?
Earl0523 is offline   Reply With Quote
Old 06-08-2018, 05:44 PM   #9
member
 
Join Date: Apr 2018
Posts: 346
Default

Quote:
Originally Posted by Earl0523 View Post
Thank you Gugi47- Does it come with the edges finished? rounded?
I don't know.
But you can call them and ask all you questions.
They probably can do it for some extra money.....you know nothing come free. But you never know.
Good luck.
Gugi47 is offline   Reply With Quote
Old 06-11-2018, 12:57 PM   #10
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

Starboard can be routered easily.
shrew is offline   Reply With Quote
Old 06-28-2018, 11:48 PM   #11
Lt. JG
 
Join Date: Sep 2017
Posts: 17
Default

I ordered a sheet from this company. I had a friend at an auto-glass shop cut and round the edges. The door is pretty much an exact match!
Put this link in your browser:
http://www.maxumownersclub.com/forum...door-7891.html
Hope this helps.
__________________

NickNick is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:24 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.