Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-17-2017, 06:57 PM   #1
Ensign
 
Join Date: May 2017
Location: Lorain, Ohio
Posts: 5
Default Port Screens and parts

Anyone know where I can get port screens and parts for my 1999 Maxum 3300 SCR?
__________________

Ron Owen dunfee is offline   Reply With Quote
Old 07-18-2019, 04:35 AM   #2
Ensign
 
Join Date: Jul 2019
Posts: 11
Default

I just joined and saw your old post. I found a source and bought new for my 2001 3500 SCR. reply if you still need a sorce.
__________________

Noah Genda is offline   Reply With Quote
Old 07-18-2019, 12:48 PM   #3
Lt. Commander
 
gmc60's Avatar
 
Join Date: Dec 2014
Location: Mass
Posts: 232
Default

There made of a cardboard like materiel screen glued to it ?
3 windows same and bath room smaller. Not sure you can find them
gmc60 is offline   Reply With Quote
Old 07-18-2019, 12:57 PM   #4
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

Quote:
Originally Posted by Noah Genda View Post
I just joined and saw your old post. I found a source and bought new for my 2001 3500 SCR. reply if you still need a sorce.
If you have a resource, then just post the resource so everyone can benefit.

If you have one, you can make copies. I use very, very flexible black cutting board material. Cut two frames using the existing screen as a template. Using contact cement sandwhich screen material between the two flexible frames.

Once the contact cement is fully setup, install. It will require some fine tuning to trim the shape exactly. I've been making them for years.
shrew is offline   Reply With Quote
Old 07-18-2019, 01:16 PM   #5
Ensign
 
Join Date: Jul 2019
Posts: 11
Default Port screens are Bomar,

Quote:
Originally Posted by Ron Owen dunfee View Post
Anyone know where I can get port screens and parts for my 1999 Maxum 3300 SCR?
Contact Bomar and give them height and width or length of outside trim and inside if you want. They run $9 to $17 each. A picture always helps along with the year and make of boat.
Noah Genda is offline   Reply With Quote
Old 07-18-2019, 01:26 PM   #6
Ensign
 
Join Date: Jul 2019
Posts: 11
Default Bomar screens

Sorry, I'll look for contact info and post later. Contacting Bomar is easy but I found a lady that used to work for maxum as a supplier. Not sure if she's even alive anymore. She was a huge help on parts. It may take a few days to locate my actual resources. I will update for all if I can. Thanks for the choaching.
Noah Genda is offline   Reply With Quote
Old 07-27-2019, 05:19 PM   #7
Ensign
 
Join Date: Jul 2019
Posts: 11
Default

Sorry guys, my contact has passed. But again if you contac Boma and give them a pic of port window and dimensions, height and width along with make and year if boat, you should be fine.
Noah Genda is offline   Reply With Quote
Old 05-17-2021, 07:25 PM   #8
Ensign
 
Join Date: Aug 2020
Location: New York
Posts: 1
Default

Looking for a source to provide a screen for the 20" round BOMAR hatch on a 2006 Maxum 2100SC. There are 4 tabs on the inside of the hatch rim where the screen should fasten to. I have looked on BOMAR's website which directs you to Pompanette, LLC's catalog that shows the entire hatch as a kit. I need just the screen. Thanks
chrisgla is offline   Reply With Quote
Old 08-11-2021, 08:58 PM   #9
Ensign
 
Join Date: Aug 2021
Posts: 1
Default

I just called BOMAR, they do sell the individual screen but at a premium price since they're the manufacturer.
carlosjzayas is offline   Reply With Quote
Old 08-12-2021, 02:42 PM   #10
Lt. Commander
 
Join Date: Jan 2016
Posts: 165
Default

Not to thread hijack, but the fact that BOMAR is helpful and responsive is helpful to me, so thank you! Need to contact them about the cracked strut rod base on my hatch frame.

Current contact info from their website:
Have Questions? Need Assistance?
Email: info@pompanette.com
Call: 603-826-5791
__________________
2003 3300 SE
2004_3300_SCR is offline   Reply With Quote
Old 01-29-2023, 10:41 PM   #11
Ensign
 
Join Date: Jul 2022
Posts: 2
Default

Quote:
Originally Posted by Noah Genda View Post
I just joined and saw your old post. I found a source and bought new for my 2001 3500 SCR. reply if you still need a sorce.
I need 3 for my 2004 Maxum 2500 SE
Finally2022 is offline   Reply With Quote
Old 01-29-2023, 11:38 PM   #12
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Quote:
Originally Posted by Finally2022 View Post
I need 3 for my 2004 Maxum 2500 SE
See post #7.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 02-05-2023, 12:05 PM   #13
Ensign
 
Join Date: Feb 2023
Posts: 1
Default

Hi anyone know where I can get a new windscreen starboard front with green tint. My boat is a 2700SE year 2007, if not new any other options would be a great help. Is there any other boat with the same size possibly a 2400 or 2900?
UK Maxum 2700se is offline   Reply With Quote
Old 02-06-2023, 03:08 PM   #14
Lt. Commander

 
iantan's Avatar
 
Join Date: Apr 2014
Location: Aberdeen, Scotland or The Med
Posts: 101
Default

Quote:
Originally Posted by UK Maxum 2700se View Post
Hi anyone know where I can get a new windscreen starboard front with green tint. My boat is a 2700SE year 2007, if not new any other options would be a great help. Is there any other boat with the same size possibly a 2400 or 2900?
I had a Maxum 4600 and trying to get factory original spares was virtually impossible, assuming you are in the UK. I'd make up a template and get one made, I've done it before on a couple of sports boats, most sign companies have CNC machines to cut perspex, or similar.

The difficulty will be matching the colour, no doubt it will have slightly faded from the original anyway.

Hope that helps...
iantan is offline   Reply With Quote
Old 05-30-2023, 08:28 PM   #15
Ensign
 
Join Date: Aug 2020
Posts: 1
Default

i have a 3500 also that needs new screens. where did you buy from?
SaltyDog is offline   Reply With Quote
Old 06-08-2023, 12:30 PM   #16
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

Quote:
Originally Posted by SaltyDog View Post
i have a 3500 also that needs new screens. where did you buy from?
There are only 14 posts in this thread, not including this one and the one I'm quoting.

If you go back to the first post and read all 14 subsequent posts, I think you'll find two possible solutions to your problem.
__________________

shrew is offline   Reply With Quote
Reply

Tags
port, port screens, screens

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:51 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.