This weekend I was trouble shooting the power to a 12 volt outlet. I ended up tapping into the first power screw on the back of the circuit breaker bank under the helm. (the port ignition power, oops). When I hooked the wire to the 12 volt outlet I blew a fuse somewhere. I have no power to the port ignition. I spent a few hours looking for the fuse or breaker before I ended up putting a fused jumper in from the helm power bus bar to the port ignition power just to get me home from an island. I have 12 volts at the starter, I have 12 volts at the battery switch, but nothing up at the helm.
Any information on location of any fuses would be great.
You do not always have your greatest troubleshooting skills on the Sunday of a beautiful weekend !! After about an hour on a Monday I am embarrassed to say I found the push button breaker on the top of the port engine !!! All is good now.
I spent a few hours looking for the fuse or breaker.............
I was going to reply that it should be on top of the engine under the cowl, but you said you had searched for a long time. I assumed the problem was bigger than the main 50amp breaker on teh engine. My bad, sorry about that.
Ignition power trouble
Linear Mode
