Bow Sun Pad for 1996 3200 SCR

[Reddleman]

Lost my bow sun pad during a storm. Does anyone know how to replace it?

[biggerseagar]

I think you are going to have to make one............or get one made by a professional upholsterer....

[gmc60]

did u ever find a sun pad or size of sun pad i need one also and a dash cover ?

[biggerseagar]

Gmc don't think you will get much response from a 2 year old thread. I will answer your question. They are very easy to make if you have a sewing machine but if not your local canvas maker will be able to do this for you. The same for the bitch pad.

Start a new thread if you like to get more responses.

[Phillbo]

What is a Bitch Pad?

[Kevlar7r]

Its where you get the nekid bitches to lay out! Ya know, up on the bow?

[mmwjr]

Roger see what you started

[biggerseagar]

Pictures Kevin Pictures !! I meant no disrespect......That's what we call it in this here part of the country...........

[gmc60]

was looking for the size like a print to make one ?

[Kevlar7r]

36-24-36, gmc.

Just kidding. There is a company that has the upholstery patterns, but I'm not sure if that includes the bow pad. You may need to get that custom made by a local upholstery shop.

[biggerseagar]

GMC.....I have a 3000 and I had my pad torn up alittle bit with the wind over the years. My local canvas guy did a great job on repairing it. With that said any canvas guy should be able to make you something you like.

[DeanH]

Check with Canvas Plus LLc They have the Maxum lines upholstery patterns. contact Kim Reitz 360-435-0932 or canplus@A
OL.com They are out of Arlington WA

[0Gravity]

Originally Posted by gmc60

did u ever find a sun pad or size of sun pad i need one also and a dash cover ?

I have mine for my 95' which should be the same..... I will be working on my boat tomorrow...i will try to get some pictures and measurements for you... If that will help you out...... I almost lost mine last year so I want to get the measurements for my records just in case anyway! I also have a dash cover but it's such an odd shape that getting a measurement would be impossible..... I would suggest draping an old white towel over the dash and using a sharpey put a dot where every snap is, then cut it two inches or so past them points to allow yourself to fold it over..... You will also need to cut a hole out for your shifter and create a "sock" to fit over the shifter. I will get some pics of how it looks also.

[0Gravity]

OK I was finally able to get to the boat and get you some measurements..... Here's what I came up with.......

Bow pad dimensions
Length = approx 7'
Width Narrow end towards bow = 28" - Wide end towards windshield = 34"
Fold seams were measured from the narrow end = 23", 46.5", 69.5" from the last seem to the widest end is approx. 16". The widest end has a curve cut into the end to match the windshield curve.

[0Gravity]

Here are some pictures.

Here it is folded up.

[0Gravity]

The bottom is made of a mesh material. It has zippers on each section to remove the padding.

[0Gravity]

Bottom

[0Gravity]

More

[0Gravity]

Curved Section towards windshield.

[0Gravity]

Topside