Thread Tools Search this Thread Display Modes
Old 07-06-2019, 12:26 PM   #1
Lt. JG
Join Date: Jul 2016
Posts: 17
Default 1996 3200SCR Generator issue

The battery is reading 13.5V but the generator wont start I put the necessary items on and set on the control panel in the cabin but it wont even turn over ant ideas?

jlawter is offline   Reply With Quote
Old 07-06-2019, 12:56 PM   #2
mmwjr's Avatar
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 7,415

What’s it reading at the generators starter soleniod? If the voltage is good at the generator remove the starter to see if it spins when you try cranking, note you’ll need to use a jumper cable to complete the negative path from the starters case to the generator housing bare metal or directly to the battery negative terminal.
1997 2400 SCR
5.7 Vortec / Bravo 2
mmwjr is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 07:42 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.