Go Back   Maxum Boat Owners Club - Forum > Maxum Specific > Sport Cruisers
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-27-2019, 05:35 PM   #1
Ensign
 
Join Date: Feb 2019
Posts: 4
Default Rear Sunpad Setup

I have a 2001 3000 scr and am trying to figure out how to setup the rear sunpad. I have the 3 boards and the filler cushions....I tried sliding them in under the seats in to the slots but they don't seam to fit...is there a trick I am missing?
__________________

Bretcopeland73 is offline   Reply With Quote
Old 02-27-2019, 10:46 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

Quote:
Originally Posted by Bretcopeland73 View Post
I have a 2001 3000 scr and am trying to figure out how to setup the rear sunpad. I have the 3 boards and the filler cushions....I tried sliding them in under the seats in to the slots but they don't seam to fit...is there a trick I am missing?
There are a few 3000 owners so hopefully one of them can help.

I would suspect there would be a slot or lip about 4”s below the seat cushions for the fillers to sit on. Can you post a picture?
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 03-07-2019, 05:40 PM   #3
Ensign
 
Join Date: Feb 2019
Posts: 4
Default

There is a slot underneath but I can't seem to get the filler board in the slots.....they are too wide to just slide in directly.....i figure there must be a trick I am missing.
Bretcopeland73 is offline   Reply With Quote
Old 03-08-2019, 01:18 AM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

Are the slots on both sides? If so one side is probably different that you install into first then the other.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-25-2019, 12:34 AM   #5
Lt. JG
 
Join Date: Jun 2018
Posts: 40
Default

Quote:
Originally Posted by Bretcopeland73 View Post
I have a 2001 3000 scr and am trying to figure out how to setup the rear sunpad. I have the 3 boards and the filler cushions....I tried sliding them in under the seats in to the slots but they don't seam to fit...is there a trick I am missing?
Hope this helps.
Attached Thumbnails
20190424_162901.jpg   20190424_162859.jpg   20190424_162853.jpg   20190424_162849.jpg  
MaximusBoatimus is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 01:34 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.