Reply
 
Thread Tools Search this Thread Display Modes
 
Old 03-22-2013, 03:50 PM   #1
Ensign
 
Join Date: Sep 2012
Location: United Kingdom
Posts: 9
Question Cover for 1800 SR3

Hi,

I have a problem with my cover which is fitted to the boat. I have the original Maxum cover, but have also got a very high quality cover that was made when i bought the boat. My problem is that when the two covers are fitted there is an area from the support pole to the engine hood where water pools.

After a day of rain the water has seeped through both covers and into the boat. My question is that what is the best way to waterproof the vessel without causing problems with mold and damp. I have looked for help from a cover maker who says that you will not get a waterproof cover due to the stitches which run down the center of the custom made cover, which i can understand. I had thought of getting the cover re-waterproofed but cannot see that this will work

The two things that i can think that would solve the problem would be to raise the cover with a wedge of some sort to enable the water to just run off or buy a thick waterproof tarpaulin without stitches and lay it over the boat. This would also mean that there would be some ventilation around the edges

I should also add that the cover must be as easy as possible to fit as it will be done by the marina.

Thanks for any ideas you may be able to give me
__________________

Maxum is offline   Reply With Quote
Old 03-25-2013, 01:59 PM   #2
Admiral

 
ss3964spd's Avatar
 
Join Date: Jul 2009
Location: Fairfax Va
Posts: 1,512
Send a message via Yahoo to ss3964spd
Default

I use a high quality full cover (like a car cover) on my 2400 SC3 (the boat is kept on it's trailer when not in use). There is a support pole that holds it up in the center of the cockpit, and there are no low spots. The fabric is treated with something and water simply rolls right off, even over the seams. However, if snow accumulates on the cover and creates a depression from the weight a slight amount of water seems to seep through as the snow melts.

If there's no snow, only rain, it does not leak at all.

Dan
__________________

ss3964spd is offline   Reply With Quote
Old 03-25-2013, 03:09 PM   #3
Ensign
 
Join Date: Sep 2012
Location: United Kingdom
Posts: 9
Default

Hi, thanks for your response.

Snow is not such an issue as the boat will be undercover from September to April in the UK

I have spoken to someone today who has advised me to get more straps around the sides of the cover in the hope that this will make the water slide off easier.

I am also going to apply some Fabsil Gold to the surface of the cover which should prevent the water from laying along with the extra support from the side straps.

Thanks
Maxum is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 08:39 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.