Go Back   Maxum Boat Owners Club - Forum > Classifieds > Buy | Sell | Trade
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-10-2015, 05:59 PM   #1
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default Wanted: 17-3/4 x 21 prop set for bravo II

Well, I am in need of a new prop, and it appears the size on my boat are relatively rare. I am happy with my prop set up, and not really interested in making a change.

I'm wondering if anyone else has repropped and has a pair of 17-3/4x21 or 23 props around? They would need to be the spline count for a Bravo II drive. I need the left hand desperately, but could also use the right hand.

Or, if someone has some suggestions on a prop set up that approximates my current but is easier to come by, I'm all ears!!!
__________________

Kevlar7r is offline   Reply With Quote
Old 02-10-2015, 09:54 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

You mean like this?

http://www.bosslerandsweezey.com/mer...-lh-propeller/
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 02-10-2015, 09:59 PM   #3
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

Awesome! Except it says not currently available. Great site though. I'll keep an eye on it.
Kevlar7r is offline   Reply With Quote
Old 02-11-2015, 01:25 AM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

Have you searched the WEB? I saw many other sites that came up googling for your prop size some were new for about $650, but bravo 2 props are not cheap because of the odd size and number of them is a lot less than Alphas
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 02-11-2015, 02:34 AM   #5
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

Yeah Kevin Having the same thing I get on line and look every once in a while. They are out there..... just Google them. Around $1200. For a pair.
biggerseagar is offline   Reply With Quote
Old 02-11-2015, 02:17 PM   #6
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

Oh, I've seen much cheaper than that, and yes I've searched....

Best I've seen is about $350 each new. Used ones are very hard to find. Just no inventory out there.
Kevlar7r is offline   Reply With Quote
Old 02-11-2015, 02:38 PM   #7
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,604
Default

This is not a rare size. You're looking for either:

3-Blade: 17.75 x 21

OR

3-Blade: 19.5 x 22

If you're happy with the Max. WOT RPM, then I would stick with the 17.75 x 21 that you've been using. These are not hard to find, just not common to be found USED. Either people are using their props, or replacing damaged props. The used prop market is always lean as a result.
shrew is offline   Reply With Quote
Old 02-11-2015, 02:40 PM   #8
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

It's a shame you don't want stainless steel props $$$$$$$$$$$$$$$. Cash in the 401 :-)
biggerseagar is offline   Reply With Quote
Old 02-11-2015, 02:55 PM   #9
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

Unobtainium props! Lol.

I have never run my boat to WOT. I like just getting on plane and humming along.

Maybe if I get this new job I'm looking at, I'll buy gold plated ones! Lol.
Kevlar7r is offline   Reply With Quote
Old 02-11-2015, 04:02 PM   #10
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

Unobtainium

Yea stronger than SS yet can sense when you are to strike something and fold up to protect itself and not break O/D gears
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 02-11-2015, 04:19 PM   #11
Lt. JG
 
DeanH's Avatar
 
Join Date: Jun 2013
Posts: 23
Default

Have you considered the more economical solution of sending them out for repair and refurbishment. They do wonderful things today, coming back just like new.
__________________
If you can’t repair it, maybe it shouldn’t be on board.
- Lin and Larry Parde
DeanH is offline   Reply With Quote
Old 02-11-2015, 05:55 PM   #12
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

Yup. Believe it or not, there are no longer any prop shops in Jacksonville Florida. I sent my port prop out to Brunswick, GA to get it worked on. They weren't sure it would survive a new hub being pressed in, which is why I was hedging my bets by shopping.

Just got a call that it is back at the marina, and all fixed! I'll find out in a couple hours when I run over there.

Still shopping though, I need spares.

Never had this problem before. All my prior boats were either Merc outboard or Alpha one, which all share props. I have 6 of those props laying around the garage. I gave 2 with an extra motor I sold... They were just always a dime a dozen.
Kevlar7r is offline   Reply With Quote
Old 02-12-2015, 03:05 AM   #13
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

Well, got my port prop back repaired. She survived getting a new hub. Still in the market for spares, though!
Kevlar7r is offline   Reply With Quote
Old 02-16-2015, 12:47 AM   #14
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

Interesting...

My props are different sizes. 19.5 diameter on the port, and 17 3/4 on the starboard. Both 21 pitch.

I guess that explains why I've always felt like the port motor had more "power."

So, I guess I'm still shopping!!!
Kevlar7r is offline   Reply With Quote
Old 02-16-2015, 01:21 AM   #15
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

That would explain it. Guess the port required more throttle to keep the boat straight.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 02-16-2015, 02:51 AM   #16
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

Well, there are several differences. The port motor was replaced last year. The port outdrive shifts much harder than the starboard. A solid thunk, vs. The starboard quietly shifts in. The starboard throttle cable is tighter than the port.

The 2 motors are very different. Its taken a little to get used to it. The prop difference is just the latest piece.

The boat has character. :-)
Kevlar7r is offline   Reply With Quote
Old 02-16-2015, 11:52 AM   #17
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

Why do I feel the captain is a bit of a character as well ;-)
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 02-16-2015, 04:20 PM   #18
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

That's true as well, Mike. :-)
Kevlar7r is offline   Reply With Quote
Old 02-16-2015, 05:06 PM   #19
Captain
 
Kevlar7r's Avatar
 
Join Date: Aug 2014
Location: Jacksonville, FL
Posts: 746
Default

I think this picture sums it up pretty well.
Attached Thumbnails
V__5DDB.jpg  
Kevlar7r is offline   Reply With Quote
Old 02-16-2015, 08:56 PM   #20
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,232
Default

So you're one of those guys who says hold my beer and watch this
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 08:24 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.