Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-26-2013, 12:15 AM   #1
Ensign
 
Join Date: Jul 2013
Posts: 8
Default Parting-out 1998 Maxum 1700SR, motor, prop, trailer, and accessories

Mercruiser 3.0 OnBoard
I had a professional pull everything apart and these are the motor parts that are in good condition:

Alpha 1 Gen 2 Transom Assembly (must be local and you must remove)

Exhaust Manifold and Pipes

Short Block Assembly (needs rebuilding)

Complete Alpha 1 Stern Drive (fresh water, pressure tested, 2:0 ratio) has a dinged scag (only flaw)

Alpha 1 Gen 2 Trim Cylinder Head

21 Pitch Prop

Rochester Flame Arrestor

Galvanized Escort Trailer

Seats are all in excellent to good condition, only tears are on the underside corners on one or two pieces.

I have both front curved windshields glass parts (the frame is a bit bent, and missing passenger side glass)

electronic ignition

Let me know if you are looking for anything not on this list!
Photos are posted below!
__________________

citrineaux is offline   Reply With Quote
Old 07-29-2013, 08:45 PM   #2
Ensign
 
Join Date: Jul 2013
Location: Saskatchewan, Canada
Posts: 5
Default

what shape is the prop in and how much I will pay shipping

thanks brad
__________________

Bad Ass is offline   Reply With Quote
Old 08-02-2013, 03:28 PM   #3
Lieutenant
 
JoDo's Avatar
 
Join Date: Jul 2012
Posts: 72
Default

Lounge seats? Color and how much? Where is location?
JoDo is offline   Reply With Quote
Old 08-06-2013, 03:09 AM   #4
Ensign
 
Join Date: Jul 2013
Posts: 8
Default

Hi, Sorry I missed this, I thought I would get a email...anyways, the propeller is in good condition. The professional that came out said I could get around $50. He gave me rough estimates of what he has sold things for and he knew the boat well. I will post the picture in the morning. I am in Framingham, Massachusetts.
citrineaux is offline   Reply With Quote
Old 08-06-2013, 03:13 AM   #5
Ensign
 
Join Date: Jul 2013
Posts: 8
Default

Hi,

They are mostly white and gray with maroon accents. I will take a picture in the morning. They are in good condition, I noticed a few tears on the far bottom corners, not on the seat portion at all. The wood also could use a little stabilization, but looked easily done with a few nails/screws. I was looking to get $80 for each full seat, with the 4 sections.
citrineaux is offline   Reply With Quote
Old 08-06-2013, 11:38 AM   #6
Commander
 
Join Date: Mar 2010
Location: Southern Maine
Posts: 289
Default

Sent Private Message

-JP
CountryME is offline   Reply With Quote
Old 08-06-2013, 04:58 PM   #7
Ensign
 
Join Date: Jul 2013
Posts: 8
Default

IMAG1304.jpgIMAG1305.jpgIMAG1306.jpgIMAG1307.jpgIMAG1308.jpg
citrineaux is offline   Reply With Quote
Old 08-06-2013, 04:59 PM   #8
Ensign
 
Join Date: Jul 2013
Posts: 8
Default

IMAG1309.jpgIMAG1310.jpgIMAG1312.jpgIMAG1313.jpg
citrineaux is offline   Reply With Quote
Old 08-07-2013, 02:40 AM   #9
Ensign
 
Join Date: Jul 2013
Posts: 4
Default

What tach is in that model? I need a 5" flsuh mount for my 99 2100 SR.
mrmike531 is offline   Reply With Quote
Old 08-07-2013, 11:27 PM   #10
Lieutenant
 
JoDo's Avatar
 
Join Date: Jul 2012
Posts: 72
Default

Seats match my boat perfect. I will PM you my phone. Not sure how much to ship across country though.
__________________

JoDo is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 02:36 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.